1. Home
    2. /
  2. Manuals
    3. /
  3. 2Wire
    4. /
  4. 3600HGV
    5. /
  5. 14
Page 66 / 138 Scroll up to view Page 61 - 65
Management and Diagnostic Console
61
Current Status
The current operating condition of the broadband link.
Fully operational.
The broadband link is operational
(including connection to ISP and other services).
Initializing.
The broadband link is preparing to connect.
Establishing link.
The broadband link is connecting.
No physical link signal.
No physical signal detected on the
broadband link.
Physical connection.
The broadband link is connected.
Error.
There is a broadband link error.
DSL Connection Details (for DSL models only)
DSL Line (Wire Pair)
Line 1 (inner pair), Line 2 (outer pair), or Searching for DSL
signal. During installation, the 2Wire gateway auto detects
whether the DSL signal is on line 1 or line 2.
Protocol
G.dmt, G.lite, or ANSI (T1.413).
DSL Channel
Fast or Interleaved.
DSLAM
DSLAM vendor identification. For G.dmt or G.lite protocol,
values are Country, Vendor, and Specific. For ANSI (T1.413)
protocol, values are ID, Rev (Revision), and Std (Standard).
ATM PVC Info
The ATM VPI/VCI.
ATM Encapsulation
LLC or VCMux.
ISP Details
Connection Type
The method by which the 2Wire gateway connects to the ISP:
Direct_IP
, PPPoA, or PPPoE. For the HomePortal 1000, direct
uses an RFC2684 (formerly RFC 1483) bridged Ethernet
connection without FCS (PID=0x00-07) format.
User Name
The 2Wire gateway user name.
PPPoE Access Concentrator
This field is present only when the connection type is PPPoE.
PPPoE Service
The type of PPPoE services being used. This field is present
only when the connection type is PPPoE.
IP Address Range
The broadband address of the 2Wire gateway.
Subnet Mask
The subnet mask to be used by the 2Wire gateway on the
broadband link.
Gateway
The IP address of the default gateway (default router) that
the 2Wire gateway connects to on the broadband link.
Item
Description
Page 67 / 138
Management and Diagnostic Console
62
If there is an error on the broadband link or with the ISP connection, click the
Reset Broadband Link
or
Reset
ISP Connection
button to reset the connections.
Primary DNS
The IP address of the primary DNS server that the 2Wire
gateway is to use for DNS name resolution on the broadband
link.
Secondary DNS
The IP address of the secondary DNS server that the 2Wire
gateway is to use for DNS name resolution on the broadband
link.
Host Name
The 2Wire gateway host name. This field is only present if
the user configures the 2Wire gateway with a host name.
Domain Name
The domain name associated with the 2Wire gateway on the
broadband link.
MTU
Maximum size of the packets sent from a computer to the
network.
Spoof MAC Address
Either Disabled (if the default factory-set MAC address is
used) or Enabled (if the computer’s MAC address is used).
Item
Description
Page 68 / 138
Management and Diagnostic Console
63
Broadband Link - Statistics Page
The Broadband Link - Statistics page shows statistics associated with the 2Wire gateway broadband link.
Figure 26. MDC Broadband Link Statistics Page
The Broadband Link – Statistics page includes the following information:
Note:
To update the information displayed on this page, click the browser’s Refresh button.
Item
Description
DSL (for DSL models only)
Current Rate
The DSL downstream and upstream rate, in kilobits.
Max Rate
The maximum DSL downstream and upstream rate, in
kilobits.
Page 69 / 138
Management and Diagnostic Console
64
To reset the broadband link statistics, click the
Reset
button.
Current Connection
Current Noise Margin.
The current downstream and
upstream noise margin in dB.
Current Attenuation.
The current downstream and
upstream DSL attenuation in dB.
Current Output Power.
The current downstream and
upstream DSL transmit and receive power in dB.
ATM
Transmit
The cumulative number of cells transmitted, and the
number and percentage transmitted in error.
Receive
The cumulative number of cells received, and the number
and percentage received in error.
IP
Transmit
The cumulative number of IP packets transmitted, the
cumulative number of IP payload bytes transmitted, and
the number and percentage transmitted in error.
Receive
The number of bytes and packets received, and the
number and percentage received in error.
Item
Description
Page 70 / 138
Management and Diagnostic Console
65
Broadband Link - Detailed DSL Statistics Page
The Broadband Link – Detailed DSL Statistics page shows a set of cumulative DSL statistics associated
with the 2Wire gateway.
Figure 27. MDC Broadband Link Detailed DSL Statistics Page
Note:
This link is present only if the 2Wire gateway connects to the Internet via ADSL.
Note:
To update the information displayed on this page, click the browser’s Refresh button.

Rate

4.5 / 5 based on 2 votes.

Popular 2Wire Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top