Management and Diagnostic Console

56

System Summary Page

The System Summary page shows general information about the 2Wire gateway, its configuration, and

components.

Figure 24. MDC System Summary Page

Depending on the service provider and the components installed, the System Summary page includes the

following information:

Item

Description

System

Model

2Wire gateway model number (for example,

“2700HGV Gateway”).

Serial Number

2Wire gateway serial number.

MAC Address

2Wire gateway MAC address.

Management and Diagnostic Console

57

Hardware Version

2Wire gateway hardware version.

Hardware Options

The type of peripheral device installed.

DSL Modem Type

ADSL or ISDN.

Current Software

2Wire gateway software version.

Configuration

Key Code

The key code associated with the current

provisioning settings. The value is

Unprovisioned if the 2Wire gateway has not yet

been provisioned.

System Time

The day, month, year, and time; or “Retrieving

date and time settings from Internet” if not set.

Time Since Last Boot

The time elapsed since the 2Wire gateway was

last restarted.

Last ID Post

The time elapsed since the 2Wire gateway

communicated with the configuration server.

Components

DSL Modem

DSL modem software version.

Firewall Rules

Current version of the installed firewall rules

database.

Application List

Current version of the application list.

Note:

The contents of the Components list varies according to service provider-specific

information. For example, the Components list may contain language files (such as

common_en, common_es, or common_fr); user interface files (such as base_ui); or VoIP files

(such as base_voice).

Item

Description

Management and Diagnostic Console

58

Broadband Link - Summary Page

The Broadband Link - Summary page allows you to view 2Wire gateway broadband connectivity-related

settings, and reset the Broadband Link and ISP Connection.

Figure 25. MDC Broadband Link Summary Page

The Broadband Link – Summary page includes the following information:

Item

Description

Connection Information

Broadband Connection

Built-in ADSL Modem or External Broadband Modem via

Ethernet.

Management and Diagnostic Console

59

Current Status

The current operating condition of the broadband link.

Fully operational.

The broadband link is operational

(including connection to ISP and other services).

Initializing.

The broadband link is preparing to connect.

Establishing link.

The broadband link is connecting.

No physical link signal.

No physical signal detected on the

broadband link.

Physical connection.

The broadband link is connected.

Error.

There is a broadband link error.

DSL Connection Details (for DSL models only)

DSL Line (Wire Pair)

Line 1 (inner pair), Line 2 (outer pair), or Searching for DSL

signal. During installation, the 2Wire gateway auto detects

whether the DSL signal is on line 1 or line 2.

Protocol

G.dmt, G.lite, or ANSI (T1.413).

DSL Channel

Fast or Interleaved.

DSLAM

DSLAM vendor identification. For G.dmt or G.lite protocol,

values are Country, Vendor, and Specific. For ANSI (T1.413)

protocol, values are ID, Rev (Revision), and Std (Standard).

ATM PVC Info

The ATM VPI/VCI.

ATM Encapsulation

LLC or VCMux.

ISP Details

Connection Type

The method by which the 2Wire gateway connects to the ISP:

Direct_IP

, PPPoA, or PPPoE. For the HomePortal 1000, direct

uses an RFC2684 (formerly RFC 1483) bridged Ethernet

connection without FCS (PID=0x00-07) format.

User Name

The 2Wire gateway user name.

PPPoE Access Concentrator

This field is present only when the connection type is PPPoE.

PPPoE Service

The type of PPPoE services being used. This field is present

only when the connection type is PPPoE.

IP Address Range

The broadband address of the 2Wire gateway.

Subnet Mask

The subnet mask to be used by the 2Wire gateway on the

broadband link.

Gateway

The IP address of the default gateway (default router) that

the 2Wire gateway connects to on the broadband link.

Item

Description

Management and Diagnostic Console

60

If there is an error on the broadband link or with the ISP connection, click the

Reset Broadband Link

or

Reset

ISP Connection

button to reset the connections.

Primary DNS

The IP address of the primary DNS server that the 2Wire

gateway is to use for DNS name resolution on the broadband

link.

Secondary DNS

The IP address of the secondary DNS server that the 2Wire

gateway is to use for DNS name resolution on the broadband

link.

Host Name

The 2Wire gateway host name. This field is only present if

the user configures the 2Wire gateway with a host name.

Domain Name

The domain name associated with the 2Wire gateway on the

broadband link.

MTU

Maximum size of the packets sent from a computer to the

network.

Spoof MAC Address

Either Disabled (if the default factory-set MAC address is

used) or Enabled (if the computer’s MAC address is used).

Item

Description