Page 56 / 132 Scroll up to view Page 51 - 55
Firewall Tab
51
Click the Advanced Settings
link under the tab to open the Edit Advanced Firewall Settings page.
Figure 23. Edit Advanced Firewall Settings Page
1.
In the Attack Detection panel, deselect the appropriate checkbox.
2.
Click
SAVE
.
Page 57 / 132
52
Management and Diagnostic Console
This chapter describes the 2Wire gateway Management and Diagnostic Console (MDC). The Management
and Diagnostic Console provides information about the status of the 2Wire gateway, its broadband network
connections, attached home networking devices, system and security information, and a running log of any
error conditions.
You can use the tools provided to:
View configuration and service provisioning information.
View operation logs.
Perform diagnostic tests.
Configure the gateway.
The following sections describe how to access the Management and Diagnostic Console, use the
diagnostic and configuration tools, and modify settings.
Accessing the MDC
To access the MDC from your in-home or office network, enter the following URL:
Using the MDC
After you access the Management and Diagnostic Console, a navigation bar allows you to quickly select
pages on the site. The navigation bar consists of the following links:
Note:
The MDC pages available are dependent on the 2Wire gateway software release. The
MDC pages shown in this chapter are for 2Wire gateways running software release 4.21.x If
your gateway is running a software release earlier than 4.21.x, some of these pages may not
be available.
Group
Link
Summary
System Summary
Broadband Link
Summary
Statistics
Detailed Statistics
Configure
Local Network
Status
Statistics
Page 58 / 132
Management and Diagnostic Console
53
Local Network
Device List
Wireless
Configure
Address Allocation
Firewall
Settings
Detailed Information
Advanced Settings
Voice
Configure Server
Troubleshooting
DSL Diagnostics
Event Log
Network Tests
Upgrade History
Resets
Advanced
Syslog Settings
Provisioning Info
Configure Time Services
Configure Services
Static Routes
DNS Resolve
Traffic Shaping
Link Manager
Detailed Log
Note:
The link groups that display are dependent on the 2Wire gateway model. For example,
DSL Diagnostics will display only if a user has a gateway that connects to the Internet via DSL.
Group
Link
Page 59 / 132
Management and Diagnostic Console
54
System Summary Page
The System Summary page shows general information about the 2Wire gateway, its configuration, and
components. For example, it shows the hardware and software version being used by the 2Wire gateway.
Broadband Link Pages
The Broadband Link pages show summary, detailed status, and statistical information about the 2Wire
gateway broadband link; and lets you change configuration settings. For example, the Statistics page shows
current upstream and downstream DSL data rates.
Local Network Pages
Local Network pages show the general operating status of the home network, and statistics associated
with network interfaces. For example, the Statistics page shows the transmit and receive packet count for
Ethernet, Wireless, HomePNA, and USB interfaces.
Firewall Pages
Firewall pages allow you to access settings and detailed information for the gateway’s firewall, and to
configure the firewall if necessary. For example, you can use the Firewall Settings page to access
applications that are usually blocked by the firewall.
Troubleshooting Pages
Troubleshooting pages allow you to view detailed logs that maintain a record of all significant 2Wire gateway
events, and to perform diagnostic tests. For example, if you are experiencing connection problems you can
use the Ping tool on the WAN Tests page to ensure that the 2Wire gateway can “ping” a designated IP
address.
Advanced Pages
Advanced pages provide detailed information and sophisticated diagnostics that, in general, should only be
accessed by technically advanced users.
Page 60 / 132
Management and Diagnostic Console
55
Remote Management Feature
Management and Diagnostic Console pages that affect gateway configuration can be accessed remotely
only
if your organization has enabled the Remote Management feature. If the feature is not enabled, an
error message will display when you click the link to access the following pages.
Broadband Link - Configuration
Local Network - Configuration
Local Network - Address Allocation
Firewall - Settings
Firewall - Detailed Information
Firewall - Advanced Settings
Troubleshooting - Configure Logs
Troubleshooting - Resets
Advanced - Syslog Settings
Advanced - Configure Time Services
Advanced - Configure Services
Advanced - Static Routes
Advanced - DNS Resolve
Advanced - Traffic Shaping
The following section shows Management and Diagnostic Console pages and describes how to use the
information provided to troubleshoot the 2Wire gateway.

Rate

4.3 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top