1. Home
    2. /
  2. Manuals
    3. /
  3. 1net1
    4. /
  4. ALR-U270
    5. /
  5. 6
Page 26 / 34 Scroll up to view Page 21 - 25
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
26
Figure 3-4-2-11-3 Add new rule
Figure 3-4-2-11-4 Rule Table
3.4.2.12 Bridge Mode
The default LTE Bridge mode is disabled. You can enable and change the device
to bridge mode.
Figure 3-4-2-12-1 LTE Bridge Setting page
Figure 3-4-2-12-2 Enable bridge mode
3.4.3 System Settings
Page 27 / 34
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
27
Figure 3-4-3-1 System Settings
3.4.3.1 Firmware Upgrade
Local Upgrade
On this page, you can upgrade the current Router version and LTE Version
from the local PC. 100s is needed to complete the whole upgrade process, and
then the device will reboot automatically.
Figure 3-4-3-1-1 Firmware Upgrade
Remote Upgrade
After the device detects the new router and LTE version from Web server, the
device will upgrade the new version automatically, or the device will upgrade the
new version after you click the
“
Upgrade
”
button.
Figure 3-4-3-1-2 Remote Upgrade
Note:
1)
The firmware version must be suitable for the corresponding hardware;
2)
Please make sure the adequate and stable power supply while upgrading.
3.4.3.2 Device Security
Device Password:
The default password is admin, you can enter 1~32 characters for 2 times as
your new password. Then you would logout automatically and you should login to
the system by the new password.
Page 28 / 34
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
28
Figure 3-4-3-2-1 Device Settings
System Security Settings
You can configure the system security settings to protect the device itself from
the external attacking.
Figure 3-4-3-2-2 System Security Settings page
Remote management(via WAN)
You can access to the router via WAN IP address and achieve the remote
control function when the remote management feature is enabled.
Remote management(via Wi-Fi)
The users on the wireless client are able to manage the WebGUI in default; you
can disable this feature here.
Respond to PING on WAN
It is allowed to ping on WAN in default, you can disable it here.
SPI Firmware
Enable this feature to enhance protection to all the wired and wireless PCs
against intruders and most known Internet attacks.
HTTPS Web Login
This function allows the users to login the system by the https protocol method.
3.4.3.3 Reset&Reboot
From this page, you can click the “Restore” button to load default to
the factory
setting and click the
“
Reboot
”
button to reboot the device.
Figure 3-4-3-3-1 Factory Reset
Page 29 / 34
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
29
3.4.3.4 Scheduled Reboot
Clicking on th
e header of the “
Scheduled Reboot
” tab will
take you to the
“
Scheduled Reboot
”
page. From this page, you can configure the time that the
device reboots.
Figure 3-4-3-4-1 Scheduled Reboot
For example, choose
“
Mon
”
for
“
Date
”
and set 14h30min for
“
Time
”
, the device
will reboot automatically at the 14:30 on Monday.
3.4.3.5 NTP
From this page, you can set the Current Time, Time Zone, NTP Server and NTP
synchronization. When the device obtains the WAN IP, the current time will
synchronize with the NTP server automatically.
Figure 3-4-3-5-1 NTP Setting
3.4.3.6 Backup & Restore
Clicking the
“Backup” button, the current settings will be saved as a data file to
the local PC. You can restore the device configuration from the files that you saved.
Figure 3-4-3-6-1 Backup & Restore
3.4.3.7 Watchdog
Clicking on th
e header of the “
Ping Watchdog
”
tab will
take you to the “
Ping
Watchdog
” page.
From this page, you can config
ure “
Ping Watchdog
”
feature.
Page 30 / 34
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
30
Figure 3-4-3-7-1 Ping Watchdog page
Figure 3-4-3-7-2 Enable Ping Watchdog
URL or IP address to ping:
the default URL is
“
no.pool.ntp.org
”
, you can also
change it to other URL what you want to ping;
Number of ICMP Request per ping group:
the default value is 5, you can
also change it to other values, the maximum value is 9;
Wait time of the ICMP Request(s):
the default value is 3, you can also
change it to other values;
Amount of fail ICMP to consider
“
FAIL
”
situation:
the default value is 3, you
can also change it to other values;
Wait time between ping groups(min):
the default value is 3, you can also
change it to other values, the minimum value is 3.
According to the default status, it means ping URL
“
no.pool.ntp.org
”
, the
number of ICMP Request per ping group is 5, wait time of the ICMP Request(s)
is 3 seconds, wait time between ping groups(min) is 3 minutes, if amount of
fail ICMP is 3 or more than 3, the LTE module will reboot automatically.
3.4.3.8 System Log
This function is used to display system information. Click
“
Refresh
”
key, system log can be
refreshed. Clear key can clear all information.

Rate

4.2 / 5 based on 5 votes.

Popular 1net1 Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top