Page 31 / 34
Scroll up to view Page 26 - 30
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
31
Figure 3-4-3-8-1 System Log
3.5 4G
Click on
the “
4G
”
button, you can see four parts as below: Bridge Settings, APN
Settings, LTE Connection Settings and PIN Management.
Figure 3-5-1 4G
3.5.1 APN Settings
The default APN mode is automatic and APN is NULL, if you want to configure
the LTE APN, you should choose the manual mode, and then you can configure the
APN setti
ngs by clicking on the “Add New” button
(Figure 3-5-1-2).
Page 32 / 34
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
32
Figure 3-5-1-1 LTE APN page
From the “Host Name” option, you can choose the APN that you had configured,
then click “Set as default” to
make it take effect.
Figure 3-5-1-2 APN Configuration
Figure 3-5-1-3 Choose the user-defined APN
Page 33 / 34
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
33
3.5.2 PIN Management
From this page, you can see the USIM card status and PIN status.
The default PIN status is disabled; you can input the correct PIN to enable the
PIN function. The maximum PIN attempts are 3, otherwise you must enter PUK to
reset the PIN code. The USIM will be invalid after the unsuccessful attempts for 10
times.
PIN Management
:
Enter the correct PIN to enable or disable the PIN
function, PIN code should be 4 to 8 digits;
Remember PIN
: The system will remember the PIN code of the USIM and
verify the USIM automatically if the save PIN function is enabled.
PIN change:
You can input the current PIN code 1 time and the new PIN code
for 2 times to change the PIN code. PIN code should be 4 to 8 digits.
PUK Management
: Input the correct PUK code and the new PIN code for 2
times to reset the PIN code. The PIN code should be 4 to 8 digits.
Figure 3-5-2-1 PIN Management page
Figure 3-5-2-2 Enable the PIN
Page 34 / 34
LTE CPE
（
ALR-U-series
）
User Manual
05/21/2015
34
Figure 3-5-2-3 PUK Management page
19216811.live