1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-660HN-51

Zyxel P-660HN-51 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Zyxel P-660HN-51 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 12
www.zyxel.com
802.11n Wireless ADSL2+ 4-port
Gateway
Firmware Version 1.10
Edition 1, 9/2010
P-660HN-51
DEFAULT LOGIN DETAILS
IP Address:
User Name:
admin
Password:
1234
Copyright 2010
ZyXEL Communications Corporation
Page 2 / 12
2
Device Panels
POWER
LAN1-4
INTERNET
WPS/WLAN
DSL
RESET
LAN PORT 1-4
POWER
DSL PORT
Page 3 / 12
P-660HN-51
3
Overview
The P-660HN-51 is an ADSL2+ router with a four-port built-in Ethernet
switch and IEEE 802.11n wireless capability. The P-660HN-51 allows
wired and wireless clients to safely access the Internet. The built-in
firewall blocks unauthorized access to your network. It supports other
helpful features, including Quality of Service (QoS) which allows time-
sensitive services and applications to flow more smoothly.
Connect the Stand
Either place the P-660HN-51 flat on a desk or table or use the stand for a
vertical installation. To connect the stand, line up the arrow on the stand
with the arrow on the bottom of the device as shown.
Page 4 / 12
4
Hardware Connections
This section shows you how to set up your P-660HN-51.
1.
DSL
: Use a telephone cable to connect your P-660HN-51’s
DSL
port
to a telephone jack (or to a splitter, if one is already installed).
2.
LAN
: Use an Ethernet cable to connect a computer to a
LAN
port for
initial configuration and/or Internet access.
3.
POWER
: Use the power adaptor provided with your P-660HN-51 to
connect an appropriate power source to the
POWER
socket. Make
sure the power at the outlet is on. After connecting the power adapter,
look at the lights on the front panel.
2
1
3
Page 5 / 12
P-660HN-51
5
•
The
POWER
light blinks while your P-660HN-51 starts up and then
stays on once it is ready. The
DSL
light turns on when the P-
660HN-51 has a DSL connection. The
WPS
light turns on when the
wireless LAN is ready. The
INTERNET
light turns on when the
gateway is able to access the Internet and will blink when the P-
660HN-51 is sending or receiving data.
•
Each
LAN
light stays on if the corresponding
LAN
port is properly
connected and blinks when there is traffic.
If the
POWER
,
DSL
, or connected
LAN
lights are not on, please check
your connections and inspect your cables for damage. If the lights are
still off, contact technical support.
Set Up a Wireless Network
The wireless LAN on your P-660HN-51 is enabled by default. To add a
wireless client to the network, refer to the settings sticker that comes with
your P-660HN-51, which will look similar to the following example:
Configure wireless devices that you want to connect to the wireless
network to use the same wireless settings as the P-660HN-51.
The default wireless settings vary for each P-660HN-51. Refer to the
settings sticker of your device and use the provided information.
SSID: ZyXEL00561
WPA: FB373BD356

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top