1. /
  2. Manuals
  3. /
  4. ZTE
  5. /
  6. H220N

ZTE H220N Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of ZTE H220N router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 16
ZXV10 H108L
Home Gateway
User Manual
Version 1.0
Page 2 / 16
LEGAL INFORMATION
Copyright © 2010 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any repro-
duction or distribution of this document or any portion of this document, in any form by any means,
without the prior written consent of ZTE CORPORATION is prohibited.
Additionally, the contents of
this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service
marks, of ZTE CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations
or conditions are disclaimed, including without limitation any implied warranty of merchantability,
fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall
not be liable for damages resulting from the use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or appli-
cations covering the subject matter of this document. Except as expressly provided in any written
license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any
license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without
further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related infor-
mation.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No.
Revision Date
Revision Reason
R1.1
20100325
Abridged version
R1.0
20100118
First Edition
Serial No. SJ-20100115161948-001
Publishing Date: 20100325
1
Page 3 / 16
1
Safety
Safety
Safety Instructions
Instructions
Instructions
During Installation and Application
l
Use the power adapter delivered with the product. Other power adapter may make the
device unable to work normally or even damage the device.
l
Check load capacity of power socket and power cable. Overloading of power socket or
broken power cable may cause an electric shock or fire. It is recommended to check cables
periodically and replace the broken one immediately.
l
Appropriate space for heat dissipation is required to prevent the product from overheating.
l
Keep the product away from heat sources. Do not expose the device to high temperature
environment and direct sunlight.
l
Keep the product away from moisture or vapor. Do not splash any fluid on the product.
l
Do not place the product on any unstable surface.
l
Switch OFF and unplug this product carefully when it is not in use or before cleaning. Pay
attention to the high temperature on the surface of the transformer.
l
Delay between switching OFF and switching ON should be more than 3 seconds.
l
Do not block the heat dissipation opening of the product.
l
When the product is not used for a long period of time, unplug the power cord.
l
Watch out the children especially when they are using the device without any custody.
l
If any abnormal phenomenon appear on this product (such as smoke, weird sound and/or
smell), unplug the power adapter.
l
Do not use the device in the thunderstorm.
For Service
Do not attempt to disassemble, repair, or open this product, which will cause you lose the war-
ranty services. Contact qualified service personnel in case of problems, especially under the
following conditions:
l
The power socket or cable is damaged.
l
Liquid is splashed into the product.
l
The product is exposed to rain or water.
l
The product does not work normally when the operating instructions are followed.
l
The product is dropped or struck, causing the product damaged.
2
Page 4 / 16
2
Introduction
Introduction
Introduction
2.1
Product
Product
Product Overview
Overview
Overview
Thank you for using ZXV10 H108L (hereafter referred to as H108L) Home Gateway.
H108L can serve as the center of a home network where various devices can share the Internet
connection to provide data, communication, and entertainment services.
The delivery of services needs the support of local operators, contact local operators for more
information.
2.2
Introduction
Introduction
Introduction to
to
to Indicators
Indicators
Indicators
Indicators on the front panel are used to show the status of H108L, which is shown in the figure
below.
Indicators on the front panel are described in the table below.
Indicator
Status
Description
Constantly
on
The power is connected and switched on.
Power
Off
The power is not connected or the device fails to
function
Flashing
The device is functioning.
Run
Off
The device fails to function.
Constantly
on
The connection is established and the IP address is
allocated.
Flashing
Data is being transmitted.
Internet
Off
The following problems may be present:
l
The system is not powered on.
l
ADSL connection is not established.
l
The IP or PPP session is terminated due to a
reason other than
Idle Timeout
.
l
ADSL is in the bridge mode only.
Constantly
on
ADSL connection is established.
Flashing
ADSL connection is being established.
DSL
Off
ADSL connection is not established.
3
Page 5 / 16
Indicator
Status
Description
Constantly
on
LAN connection is established.
Flashing
Data is being transmitted.
LAN1–LAN4
Off
LAN connection is not established.
On
WLAN RF is switched on.
Flashing
Data is being transmitted.
WLAN
Off
WLAN RF is switched off.
On
WPS is switched on and functioning. The indicator
will turn off in five minutes.
Slowly
flahsing
Negotiation is in process through WPS.
Fast flashing
WLAN terminal’s WPS access encountered an error.
WPS
Off
Device failure or not in use.
On
USB storage device connected.
Flashing
Identifying USB storage devices or performing data
read/write.
USB1/USB2
Off
Non-USB storage device connected.
Notes:
The quantity of USB indicators ranges from 0 to 2 depending on the actual product
model.
2.3
Introduction
Introduction
Introduction to
to
to Sockets
Sockets
Sockets and
and
and Buttons
Buttons
Buttons
l
Sockets and buttons on the rear panel of H108L
The sockets and buttons on the rear panel of H108L are as follows:
The description of sockets and buttons on the rear panel of H108L is as follows:
Name
Function
Description
Power
Power socket
Connects to standard power adapter to obtain DC
power supply.
Reset
Reset button
When the device is operating, keep pressing the
button for more than 5 seconds to restore the default
settings. Then the system restarts automatically.
4

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top