Page 16 / 54
Scroll up to view Page 11 - 15
12
a. ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP, and click
Next
.
b. Dynamic IP (Via DHCP)
If your connection type is Dynamic IP, it means your IP address keeps
changing every time you connect. You do not need to enter the
information.
c. Static IP
Fill the network address information from your ISP in the IP Address,
Subnet Mask, Gateway and Primary DNS server fields and click
Next
.
Page 17 / 54
13
d. L2TP
Enter the Account and Password provided by your ISP.
L2TP
(Layer 2 Tunneling Protocol)
provides two address modes.
°
Dynamic IP:
If the L2TP offered by your ISP is Dynamic IP, please select
Dynamic IP.
°
Static IP:
Please fill in the parameters provided by your ISP.
After configuration, please click
Next
.
e. PPTP
Enter the Server IP Address, User Name, and Password provided by your ISP
PPTP
(PP Tunneling Protocol)
provides two address modes.
°
Dynamic IP:
If the PPTP offered by your ISP is Dynamic IP, please select
Dynamic IP.
°
Static IP:
Please fill in the parameters provided by your ISP.
After configuration, please click
Next
.
Page 18 / 54
14
3. Click
Apply
and reboot ZSR4154WE, or select
Reboot
in
System Tools
of
the left menu and click
Reboot the router
button.
4. While rebooting, please wait for few minutes and
DO NOT
power off.
5. Select
Network Status
of the left menu to find out the current network and
system information.
Page 19 / 54
15
Chapter 5 Advanced Settings
LAN Settings
°
MAC Address:
ZSR4154WE’s physical MAC address on your local network
is unchangeable.
°
IP Address:
ZSR4154WE’s LAN IP address (not your PC’s IP address).
Once you modify the IP address, you need to remember it for the
Web-based Utility login next time. Default value is
192.168.0.1 °
Subnet Mask:
ZSR4154WE’s subnet mask for measurement of the
network size. Default value is 255.255.255.0.
Page 20 / 54
16
WAN Settings
a. PPPoE
°
Connection Mode:
Show your current connection mode.
°
Account:
Provided by your ISP.
°
Password:
Provided by your ISP.
°
MTU:
Maximum Transmission Unit. It is the size of largest datagram that
can be sent over a network. The default value is 1492. Do NOT modify it
unless necessary.
°
Service Name:
It is defined as a set of characteristics that are applied to
a PPPoE connection. Enter it if provided. Do NOT modify it unless necessary.
°
AC Name:
Enter it if provided. Do NOT modify it unless necessary.
Internet Connection Option:
°
Connect Automatically:
Connect automatically to the Internet after
rebooting system or connection failure.
°
Connect Manually:
Connect to the Internet by the user manually.
°
Connect on Demand:
Re-establish your connection to the Internet after
the specific time (Max Idle Time). Zero means your Internet connection at
all time. Otherwise, enter the minutes to be elapsed before you want to
disconnect the Internet access.
°
Connect on Fixed Time:
Connect to the Internet during the time you fix.
19216811.live