•

button use to delete the selected MAC address

•

button use to active the configuration

Clients MAC

•

Wireless Clients MAC List

: The wireless clients MAC address list.

Advanced Settings

After access MODEM setup page successfully, please click

WLAN > Advanced Settings

link to access

the following screen:

•

Zone

: Use to select Zone

•

Beacon Interval

: Use to configure beacon interval

•

Tx Rate

: Use to configure transmit rate

•

Tx Power

: Use to configure transmit power

•

button used to active the advanced configuration.

Advanced

Routing Setup

After access MODEM setup page successfully, please click

Advanced > Route

link to access the

following screen:

•

Default Gateway Interface

: Use to configure default gateway interface

•

Destination Network Address

: Use to configure destination network address

•

Destination Mask

: Use to configure destination network mask address

•

Next Hop IP

: Use to configure next hop IP address

•

button Use to active the default gateway configuration

•

button Use to save the route item

•

button Use to modify the selected route item

•

button Use to delete the selected route item

SNTP Client Configuration

After access MODEM setup page successfully, please click

Advanced > SNTP link

to access the

following screen:

•

Automatically adjust clock for daylight saving changes

: Enable/Disable automatically adjust clock

for daylight saving changes function

•

Time Zone

: Select time zone

•

Primary Server Address

: Main SNTP server address

•

Secondary Server Address

: Standby SNTP server address

•

Poll Interval

: Poll interval time, and the unit is second

•

button Use to active the SNTP client configuration

DDNS Setup

After access MODEM setup page successfully, please click

Advanced > DDNS

link to access the

following screen:

DDNS is a dynamic domain Name system. After applying DDNS, a dynamic IP address to the mainframe

also can provide domain name services. For example, the mainframe through dial-up or XDSL DHCP

server gets IP address and domain names dynamically. Enable and configure DDNS so the host's IP

address changes will not affect the users who visit through the domain name.

•

DDNS Protocol

: Dynamic Domain Name Service

•

Enable DDNS

: Active/Inactive DDNS function

•

Server

: Available server address

If use ddns.nu protocol, the server has a domain name, and the default name is ns.ddns.nu.

•

Username

: Username which has registered successfully in DDNS.

•

Password

: Password which has registered successfully in DDNS.

•

Handle

: Bind character string and the corresponding IP address. Only available in the ddns.nu protocol

•

WAN Connection

: Use to select the WAN side connection port

•

button Use to active the DDNS Setup

DNS Configuration

After access MODEM setup page successfully, please click

Advanced > DNS Service

link to access the

following screen:

•

Domain Name

: Main domain name, and the default is wateen.net

•

button Use to active the Domain Name configuration

•

Host Name

: Host name

•

IP Address

: Host IP address

•

button Use to active the Host configuration

•

button Use to cancel the Domain/Host configuration

•

button Use to add DNS Configuration

•

button Use to delete DNS Configuration

•

button Use to edit IP Address

•

button Use to edit Host Name

IGMP Configuration

After access MODEM setup page successfully, please click

Advanced > IGMP

link to access the

following screen:

The main IGMP Proxy function is to intercept and filtrate the data transmitting of the 3rd layer on

network.

•

Enable IGMP Proxy

: Enable IGMP agent function

•

button Use to active the Host configuration

Security

Port Forwarding

After access MODEM setup page successfully, please click

Security > Port Forwarding

link to access

the following screen:

In this page you can configure one rule which permit the port visiting redirected policy, for the rule that

WAN IP is the source, and LAN IP is the destination. The mainly application example is that WAN side

client visits the LAN side server.

Add Port Forwarding Project

Click

button to access following screen:

•

Project Name

：

The project name of port forwarding

•

Enable

：

Enable the port forwarding function

•

Protocol

：

Select the protocol type TCP or UDP

•

LAN IP

：

IP address in local area network