1. Home
    2. /
  2. Manuals
    3. /
  3. RadioLabs
    4. /
  4. O2Storm
    5. /
  5. 8
Page 36 / 77 Scroll up to view Page 31 - 35
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
28
DNS Server
Manual setup DNS server IP address.
Domain Name
Assign Domain Name and dispatch to DHCP clients. It is
optional field.
802.1d Spanning Tree
Select to enable or disable the IEEE 802.1d Spanning
Tree function from pull-down menu.
Clone MAC Address
Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
3.3.11
WAN Interface Setup
This page is used to configure the parameters for wide area network that
connects to the WAN port of your WLAN Broadband Router. Here you may
change the access method to
Static IP
,
DHCP
,
PPPoE
or
PPTP
by click the
item value of
WAN Access Type
.
I
Static IP
Screen snapshot – WAN Interface Setup – Static IP
Item
Description
Page 37 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
29
Static IP
Click to select Static IP support on WAN interface. There
are IP address, subnet mask and default gateway settings
need to be done.
IP Address
If you select the Static IP support on WAN interface, fill
in the IP address for it.
Subnet Mask
If you select the Static IP support on WAN interface, fill
in the subnet mask for it.
Default Gateway
If you select the Static IP support on WAN interface, fill
in the default gateway for WAN interface out going data
packets.
MTU Size
Fill in the mtu size of MTU Size. The default value is
1400
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC Address
Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?
Enable uPNP
Click the checkbox to enable uPNP function.
Refer to 4.22 What is Universal Plug and Play (uPNP)?
Enable Web Server
Access on WAN
Click the checkbox to enable web configuration from
WAN side.
Enable WAN Echo
Reply
Click the checkbox to enable WAN ICMP response.
Enable IPsec pass
through on VPN
connection
Click the checkbox to enable IPSec packet pass through
Enable PPTP pass
through on VPN
connection
Click the checkbox to enable PPTP packet pass through
Enable L2TP pass
through on VPN
connection
Click the checkbox to enable L2TP packet pass through
Set TTL value
Click to Enable and set Time to Live value.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
Page 38 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
30
previous configuration setting.
II
DHCP Client
Screen snapshot – WAN Interface Setup – DHCP Client
Item
Description
DHCP Client
Click to select DHCP support on WAN interface for IP
address assigned automatically from a DHCP server.
Host Name
Fill in the host name of Host Name. The default value is
empty
MTU Size
Fill in the mtu size of MTU Size. The default value is
1400
Attain DNS
Automatically
Click to select getting DNS address for
DHCP
support.
Please select
Set DNS Manually
if the
DHCP
support is
selected.
Set DNS Manually
Click to select getting DNS address for
DHCP
support.
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC Address
Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?
Page 39 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
31
Enable uPNP
Click the checkbox to enable uPNP function.
Refer to 4.22 What is Universal Plug and Play (uPNP)?
Enable Web Server
Access on WAN
Click the checkbox to enable web configuration from
WAN side.
Enable WAN Echo
Reply
Click the checkbox to enable WAN ICMP response.
Set TTL value
Click to Enable and set Time to Live value.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
III
PPPoE
Screen snapshot – WAN Interface Setup – PPPoE
Item
Description
PPPoE
Click to select PPPoE support on WAN interface. There
are user name, password, connection type and idle time
settings need to be done.
Page 40 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
32
User Name
If you select the PPPoE support on WAN interface, fill in
the user name and password to login the PPPoE server.
Password
If you select the PPPoE support on WAN interface, fill in
the user name and password to login the PPPoE server.
Service Name
Fill in the service name of Service Name. The default
value is empty.
Connection Type
Select the connection type from pull-down menu. There
are
Continuous
,
Connect on Demand
and
Manual
three
types to select.
Continuous
connection type means to setup the
connection through PPPoE protocol whenever this
WLAN Broadband Router is powered on.
Connect on Demand
connection type means to setup the
connection through PPPoE protocol whenever you send
the data packets out through the WAN interface; there are
a watchdog implemented to close the PPPoE connection
while there are no data sent out longer than the idle time
set.
Manual
connection type means to setup the connection
through the PPPoE protocol by clicking the
Connect
button manually, and clicking the
Disconnect
button
manually.
Idle Time
If you select the
PPPoE
and
Connect on Demand
connection type, fill in the idle time for auto-disconnect
function. Value can be between 1 and 1000 minutes.
MTU Size
Fill in the mtu size of MTU Size. The default value is
1400. Refer to 4.23 What is Maximum Transmission Unit
(MTU) Size?
Attain DNS
Automatically
Click to select getting DNS address for
PPPoE
support.
Please select
Set DNS Manually
if the
PPPoE
support is
selected.
Set DNS Manually
Click to select getting DNS address for
Static IP
support.
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC Address
Fill in the MAC address that is the MAC address to be

Rate

3.5 / 5 based on 2 votes.

Popular RadioLabs Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top