User Manual v2.5

Page 31

of 57

Select Use the driver that is currently installed then click

Next.

User Manual v2.0

Page 32

of 57

To print a test page click on Print a test page on the

confirmation screen, click Finish to complete the

installation.

If Printing was unsuccessful right click on the Printer’s

icon then select Properties.

User Manual v2.5

Page 33

of 57

Under printer’s Properties click Port Tab and tick the IP

address (192.168.0.1) that was set on previous settings

then click Apply.

Note:

Scanning, Faxing and Photocopying functions on Multifunction printers are currently not supported on the MOFI3500-

3GN Version 2 Rev 2, Print function is the only feature that will work on these printers type when connected to the

MOFI3500-3GN Version 2 Rev 2.

User Manual v2.0

Page 34

of 57

WAN connection

On this section you can choose your Internet connection type from Static IP, PPPoE, PPP, PPTP, and DHCP.

1.

Static IP

Select this Internet connection type if your ISP provides the IP addresses that are required to establish a

connection.

a.)

IP Address - Enter the IP address provides by your ISP.

b.)

Subnet Mask - Enter the Subnet Mask provides by your ISP.

c.)

Default Gateway - Enter the Default Gateway provides by you r ISP.

d.)

Primary DNS - Enter the Primary DNS server IP address provides by your ISP.

e.)

Secondary DNS - Enter the Secondary DNS server IP address provides by your ISP.

2.

DHCP

Select this Internet connection type for your router to get an IP address from your ISP or the DHCP server.

a.)

Host name - Some ISP requires the host name of your router. You can change the current hostname of your

router.

b.)

MAC clone - Some ISP requires that you register the MAC address of your computer. Tick the box to copy

your PC’s MAC address.

c.)

MAC Address - This is the computer’s MAC address that is running the router.

3.

PPPoE

Select this Internet connection type if you’re ISP provides you a username and password to establish a

connection.

a.)

Username - Enter the username provides by your ISP

b.)

Password - Enter the password provides by your ISP

Note:

Please contact your Internet Service Provider if you do not have this information.

User Manual v2.5

Page 35

of 57

Wireless

By default, the wireless network name is: MOFINETWORK

If you do not require to change this and do not want to

set up a wireless password, you do not have to do

anything else.

If you want to change the network name (ESSID) or add a

wireless password, please do the following:

Log into the router by opening your web browser and

putting in the address bar:

Click on Log On

Click on the Network Tab

°

Wifi