ENHWI-2AN3 User’s Manual

Encore Electronics Inc.

Tel – (626) 336-4567

Fax – (626) 336-2345

Web Site – www.encore-usa.com

21

Enter the factory default username is

admin

and password is also

admin.

Click

to continue. Your default browser screen will connect to the ENHWI-2AN3

User Interface screen using the factory default address http://192.168.0.1 .

Click

to enter the mode selection screen.

ENHWI-2AN3 User’s Manual

Encore Electronics Inc.

Tel – (626) 336-4567

Fax – (626) 336-2345

Web Site – www.encore-usa.com

22

Select the mode your ENHWI-2AN3 is going to use. The Setup Wizard will skip the

WAN configuration under

AP Repeater Mode

.

Click

and your ENHWI-2AN3 will automatically detect your “Internet” Network

settings.

ENHWI-2AN3 User’s Manual

Encore Electronics Inc.

Tel – (626) 336-4567

Fax – (626) 336-2345

Web Site – www.encore-usa.com

23

The Smart Wizard will detect the DHCP and PPPoE connections automatically. In

the picture above it shows that the Smart Wizard detected a DHCP server. You can

choose the detected service type or select

“Others”

to setup the WAN settings

manually.

ENHWI-2AN3 User’s Manual

Encore Electronics Inc.

Tel – (626) 336-4567

Fax – (626) 336-2345

Web Site – www.encore-usa.com

24

Here, you can configure the host name and MAC address of the ENHWI-2AN3. The

“

Clone MAC Address”

button clones the MAC address of your PC and use it as the

MAC address of your ENHWI-2AN3 router instead of the real MAC address of the

router.

The Smart Wizard has finished setting up the

WAN Configuration

portion. Click

to proceed to other portions.

Setting up the Wireless LAN

ENHWI-2AN3 User’s Manual

Encore Electronics Inc.

Tel – (626) 336-4567

Fax – (626) 336-2345

Web Site – www.encore-usa.com

25

Enter the name for your wireless network SSID (the default is ENCORE59FE74) and

security key (default is 1234567890). Move and point your mouse over to the

security level blocks from the weakest (red block) to the strongest (green block), and

click on the selected block to select the level of security you desired. The “Key” type

will depend on the wireless security you selected. If you choose WEP as the wireless

security you will be prompted whether an ASCII or Hexadecimal is your preferred key

type. Hexadecimal requires 10 character digits on the KEY: field.

Click

to proceed