12

13

WBMR-HP-GNV2 User Manual

10

Chapter 1

Product Overview

Bottom

12

Reset Button

To reset all settings, hold down this button until the Power LED comes on

(about 3 seconds).

Power must be on.

Right Side

13

Factory Default Settings

This sticker shows the AirStation’s SSID, default encryption

key, and WPS PIN code. By default, encryption is disabled for

AirStations sold in Asia Pacific.

1

2

WBMR-HP-GNV2 User Manual

11

Chapter 2 - Placing Your AirStation

Vertical Placement

To place unit vertically, attach the stand as shown below.

Antenna Placement

The antenna is included in the package.

Screw the antenna clockwise to install.

WBMR-HP-GNV2 User Manual

12

Chapter 2

Placing Your AirStation

Horizontal Placement

For horizontal placement, the stand is not used.

Chapter 2

Placing Your AirStation

WBMR-HP-GNV2 User Manual

13

Wall-Mounting

1

To wall-mount the AirStation, attach

the stand to the wall with the two

screws (included).

8.5 cm

(~3.3 inches)

2

Snap the center of the AirStation to the stand as shown.

WBMR-HP-GNV2 User Manual

14

Chapter 3 - Installation

Automatic Setup

The AirNavigator CD can step you through installing your AirStation.

To step through the setup

program, insert the CD into your Windows 7/Vista/XP PC and follow the instructions on the screen.

If your computer uses a different operating system, use manual setup instead.

Note:

· To use a wireless client in Windows 7 or Vista, perform setup using the AirNavigator CD to automatically

generate a profile for wirelessly connecting to the AirStation. After setup is complete, once the LAN

cable is removed, you can connect from your wireless client to the AirStation.

· Before performing setup, make the settings to enable the wireless client of the computer.

Manual Setup

To configure your AirStation manually, follow the procedure below.

1

Power off your computers and networking equipment.

2

Connect your computer to one of the LAN ports on the rear of the AirStation with the

supplied Ethernet network cable.