1net1 ALR-U270 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of 1net1 ALR-U270 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 34
LTE CPE
ALR-U-series
User Manual
05/21/2015
1
LTE CPE
ALR-U series
User Manual
Page 2 / 34
LTE CPE
ALR-U-series
User Manual
05/21/2015
2
Index
1.
About this Manual
............................................................................
3
2.
Product Overview
.............................................................................
3
3.
Configuring the CPE
........................................................................
3
3.1
Login
........................................................................................................
3
3.2
Dashboard
................................................................................................
4
3.3
Status
.......................................................................................................
5
3.3.1 WAN Status
...............................................................................................................
5
3.3.2 WiFi&LAN Status
.......................................................................................................
5
3.3.3 4G Status
..................................................................................................................
6
3.3.4 Software
...................................................................................................................
6
3.3.5 Device List
.................................................................................................................
6
3.3.6 UPnP
.........................................................................................................................
7
3.4
Settings
....................................................................................................
7
3.4.1 Basic Settings
............................................................................................................
8
3.4.2 Advanced Settings
..................................................................................................
15
3.4.3 System Settings
.....................................................................................................
26
3.5
4G
..........................................................................................................
31
3.5.1 APN Settings
..........................................................................................................
31
3.5.2 PIN Management
...................................................................................................
33
Page 3 / 34
LTE CPE
ALR-U-series
User Manual
05/21/2015
3
Note:
Operating temperature: -30
60
.
1.
About this Manual
The content of this User Manual has been made as accurate as possible.
However, due to continual product improvements, specifications and other
information are subject to change without notice.
2.
Product Overview
This CPE supports LTE Band 3/7/20/31 (Subject to the configuration of LTE
module) and it supports popular operating systems like Windows, Linux and Mac.
Please refer to the Quick Start Guide that is part of the CPE supply. Once you
have identified the place for CPE, insert USIM card supplied by your service
provider at the appropriate place, plug in the adapter in the AC socket and DC in
the power port of CPE. Switch on the power Off/On switch and after few minutes
the CPE should attach itself to the LTE network. It is as simple as that. It is advised
to read this manual at leisure to make best use of the CPE.
3.
Configuring the
CPE
The basic settings in WebGUI consist of three main parts named Home,
Diagnostics, Settings, LTE. You can login to WebGUI as follows, and configure the
settings according to your requirements.
Connect the PC to CPE using the Ethernet cable. Use any one of the three
Ethernet ports on the CPE. Power on the device and waiting for about one
minutes until the device finished initializing. Please ensure that USIM card has
been inserted into USIM slot in CPE.
You can also connect the PC to CPE by WiFi, choose the correct WiFi SSID and
input the accurate password as the label shows. The default WiFi SSID is
ice.net-XXXXXX, XXXXXX denotes the last six digits of t
he CPE’s MAC address.
3.1 Login
Open your Web browser and enter 192.168.0.1 in the address bar;
Login window will popup;
When prompted for User name and password, enter the following username
and password.
Username/Password: admin/admin
Page 4 / 34
LTE CPE
ALR-U-series
User Manual
05/21/2015
4
3.2 Dashboard
After successful login, the following screen will appear and you will see four
main menus on the top bar of the WebGUI.
The bars at the top right corner indicate the received signal level, connection
status and USIM icon displays the status of USIM.,
Click “Logout”, the screen will
turn to login window.
From this page, you can also know 4G status, Wi-Fi status, WAN Info, LAN Info,
Data Traffic and Device&SIM Info. You can see the dashboard page as figure
3-2-1.
Page 5 / 34
LTE CPE
ALR-U-series
User Manual
05/21/2015
5
Figure 3-2-1 Dashboard Page
3.3 Status
On this page, you can see WAN Status, WiFi&LAN Status, 4G Status, Software,
Device List and UPnP.
Figure 3-3-1 Status
3.3.1 WAN Status
From the WAN Status, WAN IP Address, WAN Primary DNS and WAN Secondary
DNS information
can be displayed
Figure 3-3-1-1 WAN Status
3.3.2 WiFi&LAN Status
From this page, you can know the WiFi LAN Status such as SSID, Channel,
Security, Key, LAN IP and DHCP Server.
Figure 3-3-2-1 WiFi LAN Status

Rate

4 / 5 based on 4 votes.

Popular 1net1 Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top