1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. ZyWALL-Z-70-UTM
    5. /
  5. 2
Page 6 / 15 Scroll up to view Page 1 - 5
ZyWALL 70 Internet Security Appliance
5
LED
COLOR
STATUS
DESCRIPTION
On
The ZyWALL has a successful 100Mbps WAN connection.
Orange
Flashing
The 100M WAN is sending or receiving packets.
Off
The DMZ connection is not ready, or has failed.
On
The ZyWALL is connected to a 100Mbps DMZ.
Green
Flashing
The 10M DMZ is sending or receiving packets.
On
The ZyWALL is connected to a 100Mbps DMZ.
DMZ
10/100
Orange
Flashing
The 100M DMZ is sending or receiving packets.
2 Setting Up Your Computer’s IP Address
Skip this section if your computer is already set up to accept a dynamic IP
address. This is the default for most new computers.
The ZyWALL is already set up to assign your computer an IP address. Use this section to set up your
computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range
with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with
your ZyWALL.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on
computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
Windows 2000/NT/XP
1.
In Windows XP, click
Start
,
Control Panel
. In Windows 2000/NT, click
Start
,
Settings
,
Control Panel
.
2.
In Windows XP, click
Network Connections
.
In Windows 2000/NT, click
Network and Dial-up Connections
.
3.
Right-click
Local Area Connection
and then click
Properties
.
4.
Select
Internet Protocol (TCP/IP)
(under the
General
tab in Windows XP) and click
Properties
.
Page 7 / 15
ZyWALL 70 Internet Security Appliance
6
5.
The
Internet Protocol TCP/IP Properties
screen opens (the
General tab
in Windows XP).
- To have your computer assigned a dynamic IP address, click
Obtain an IP address automatically
.
-To configure a static IP address, click
Use the following IP
Address
and fill in the
IP address
(choose one
from192.168.1.2 to 192.168.1.254),
Subnet mask
(255.255.255.0), and
Default gateway
(192.168.1.1) fields.
6.
Click
Advanced
. Remove any previously installed gateways in
the
IP Settings
tab and click
OK
to go back to the
Internet
Protocol TCP/IP Properties
screen.
7.
Click
Obtain DNS server address automatically
if you do
not know your DNS server IP address(es).
If you know your DNS server IP address(es), click
Use the
following DNS server addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
If you have more than two DNS servers, click
Advanced
, the
DNS
tab and then configure them using
Add
.
8.
Click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
9.
Click
OK
to close the
Local Area Connection Properties
window.
Checking Your Computer’s IP Address
1.
In the computer, click
Start
, (
All) Programs
,
Accessories
and then
Command Prompt
.
2.
In the
Command Prompt
window, type "ipconfig" and then press
ENTER.
Your computer’s IP address must be in
the correct range (192.168.1.2 to 192.168.1.254) with subnet mask 255.255.255.0 in order to communicate with
the ZyWALL.
Page 8 / 15
ZyWALL 70 Internet Security Appliance
7
Refer to your
User’s Guide
for detailed IP address configuration for other Windows and Macintosh computer
operating systems.
3 Configuring Your ZyWALL
Choose one of these methods to access and configure the ZyWALL. This
Quick
Start Guide shows
you how to use the web configurator wizards only. See your
User’s Guide
for background information on all ZyWALL features and SMT
configuration. Click the web configurator online help for screen-specific web help.
¾
Web Configurator
¾
SMT (System Management Terminal). Access the SMT via:
o
Console port using terminal emulation software
o
LAN, WLAN, DMZ or WAN using Telnet
3.1 Accessing Your ZyWALL Via Web Configurator
Step 1.
Launch your web browser. Enter “192.168.1.1” as the web site address.
Step 2.
The default password (“1234”) is already in the password field (in non-readable format). Click
Login
to proceed to a screen asking you to change your password. Click
Reset
to revert to the
default password in the password field.
Web site address.
Default password.
Page 9 / 15
ZyWALL 70 Internet Security Appliance
8
Step 3.
It is highly recommended you change the default password! Enter a new password, retype it to
confirm and click
Apply
; alternatively click
Ignore
if you do not want to change the password
now.
Step 1.
Click
Apply
in the
Replace Certificate
screen to create a certificate using your ZyWALL’s
MAC address that will be specific to this device.
Step 4.
You should now see the web configurator
HOME
screen.
¾
Click
Internet Access
and
VPN Wizard
to begin setup wizards screens to help you configure your
ZyWALL for the first time.
¾
Click a link in the navigation panel to configure that ZyWALL feature.
¾
Click
MAINTENANCE
in the navigation panel to upload firmware and back up, restore or upload
a configuration file.
¾
Click
Renew
to renew the WAN IP address.
¾
Click
Show Statistics
to see ZyWALL performance statistics.
¾
Click
Show DHCP Table
to show current DHCP client information.
Change default password.
Page 10 / 15
ZyWALL 70 Internet Security Appliance
9
¾
Click
VPN Status
to display the active VPN connections.
¾
Click
LOGOUT
when you have finished a ZyWALL management session. The ZyWALL
automatically logs you out if it is left idle for five minutes; press
Refresh
to display the
Login
screen again and then log back in. This idle timeout timer is one of the many ZyWALL features that
you may edit using the web configurator.
LOGOUT
Navigation panel
Wizards

Rate

4 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top