Zyxel ZyAIR-G-2000-Plus-v2 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Zyxel ZyAIR-G-2000-Plus-v2 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 12
ZyXEL G-2000 Plus v2
4-port Wireless Router
Quick Start Guide
Version 3.6
Edition 1
2/2006
Page 2 / 12
ZyXEL G-2000 Plus v2 Quick Start Guide
2
Overview
The ZyXEL G-2000 Plus v2 (the ZyXEL device) is a router with a built-in wireless LAN access point that
makes it easy for people to set up a small home/office network and share Internet access via a (cable/DSL)
modem or router.
This Quick Start Guide introduces the ZyXEL device and shows you how to use the web configurator wizard.
See your User's Guide for configuration details and background information on all ZyXEL device features
using the SMT (System Management Terminal) and web configurator.
1 Hardware Installation
2 Hardware Connections
1 LAN
: Use an Ethernet cable to connect at least one computer for initial ZyXEL device configuration. These
ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-crossover (automatically adjust to the
type of Ethernet cable you use (straight-through or crossover)).
2 WAN
: Connect your modem or router to this port with an Ethernet cable.
Follow the steps below to connect the supplied
antennas.
1
Locate the antenna connectors on the sides of
your ZyXEL device.
2
Screw the antennas clockwise onto the
antenna connectors. The antennas should be
perpendicular to the ground and parallel to
each other.
Note:
Make sure the antennas are securely
screwed onto the antenna connectors.
Page 3 / 12
ZyXEL G-2000 Plus v2 Quick Start Guide
3
3 RESET
: You only need to use this button if you've forgotten the ZyXEL device's password. It returns the
ZyXEL device to the factory defaults (password is 1234 and LAN IP address 192.168.1.1). Refer to the
User's Guide for more information.
4 POWER
: Use the included power adaptor to connect the
POWER
socket to an appropriate power source.
After you’ve made the connections look at the front panel lights. .
• The
PWR
light turns steady on when the power adaptor is connected.
•
The
SYS
light blinks while performing system testing and then turns
steady on if the testing is successful.
• The
ZyAIR
(breathing
) light turns steady on while the wireless card on
the ZyXEL device is working.
• The
LAN
and
WAN
lights turn on, if
the corresponding ports are prop-
erly connectedIf the lights are not on, check your connections and
inspect your cables for damage. If you still have problems, contact
19216811.live