1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. VMG8924-B30A
    5. /
  5. 81
Page 401 / 412 Scroll up to view Page 396 - 400
VMG8924-B10A and VMG8924-B30A Series User’s Guide
401
A
PPENDIX
H
Legal Information
Copyright
Copyright © 2013 by ZyXEL Communications Corporation.
The contents of this publication may not be reproduced in any part or as a whole, transcribed,
stored in a retrieval system, translated into any language, or transmitted in any form or by any
means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise,
without the prior written permission of ZyXEL Communications Corporation.
Published by ZyXEL Communications Corporation. All rights reserved.
Disclaimer
ZyXEL does not assume any liability arising out of the application or use of any products, or
software described herein. Neither does it convey any license under its patent rights nor the patent
rights of others. ZyXEL further reserves the right to make changes in any products described herein
without notice. This publication is subject to change without notice.
Certifications
Federal Communications Commission (FCC) Interference Statement
The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operations.
This device has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this device does cause harmful interference to radio/television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
Page 402 / 412
Appendix H Legal Information
VMG8924-B10A and VMG8924-B30A Series User’s Guide
402
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
•
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
•
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
•
IEEE 802.11b, 802.11g or 802.11n (20MHz) operation of this product in the U.S.A. is firmware-
limited to channel 1 through 11. IEEE 802.11n (40MHz) operation of this product in the U.S.A. is
firmware-limited to channel 3 through 9.
•
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Notices
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
The device complies with the essential requirements of the R&TTE Directive 1995/5/EC.
Radiation Exposure Statement
This equipment complies with EU radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
National Communications Commission (NCC)
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the power, or
change the characteristics and functions of the original design of the certified lower power
frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the navigation safety
nor interfere a legal communication, if an interference is found, the service will be suspended until
improvement is made and the interference no longer exists.
Industry Canada (IC)
CAN ICES-3 (B)/NMB-3(B)
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions:
Page 403 / 412
Appendix H Legal Information
VMG8924-B10A and VMG8924-B30A Series User’s Guide
403
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme à la norme CNR-192 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer
un fonctionnement indésirable.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm
de distance entre la source de rayonnement et votre corps.
ZyXEL Limited Warranty
ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in
materials or workmanship for a period of up to two years from the date of purchase. During the
warranty period, and upon proof of purchase, should the product have indications of failure due to
faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective
products or components without charge for either parts or labor, and to whatever extent it shall
deem necessary to restore the product or components to proper operating condition. Any
replacement will consist of a new or re-manufactured functionally equivalent product of equal or
higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the
product has been modified, misused, tampered with, damaged by an act of God, or subjected to
abnormal working conditions.
Note
Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser.
This warranty is in lieu of all other warranties, express or implied, including any implied warranty of
merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for
indirect or consequential damages of any kind to the purchaser.
To obtain the services of this warranty, contact ZyXEL's Service Center for your Return Material
Authorization number (RMA). Products must be returned Postage Prepaid. It is recommended that
the unit be insured when shipped. Any returned products without proof of purchase or those with
an out-dated warranty will be repaired or replaced (at the discretion of ZyXEL) and the customer
will be billed for parts and labor. All repaired or replaced products will be shipped by ZyXEL to the
Page 404 / 412
Appendix H Legal Information
VMG8924-B10A and VMG8924-B30A Series User’s Guide
404
corresponding return address, Postage Paid. This warranty gives you specific legal rights, and you
may also have other rights that vary from country to country.
Registration
Register your product online to receive e-mail notices of firmware upgrades and information at
www.zyxel.com for global products, or at www.us.zyxel.com for North American products.
Open Source Licenses
This product contains in part some free software distributed under GPL license terms and/or GPL
like licenses. Open source licenses are provided with the firmware package. You can download the
latest firmware at www.zyxel.com. If you cannot find it there, contact your vendor or ZyXEL
Technical Support at [email protected]. To obtain the source code covered under those
Licenses, please contact your vendor or ZyXEL Technical Support at [email protected].
Safety Warnings
•
Do NOT use this product near water, for example, in a wet basement or near a swimming pool.
•
Do NOT expose your device to dampness, dust or corrosive liquids.
•
Do NOT store things on the device.
•
Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock
from lightning.
•
Connect ONLY suitable accessories to the device.
•
The RJ-45 LAN and WAN port jacks are not used for telephone line connection.
•
Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage
points or other risks. ONLY qualified service personnel should service or disassemble this device. Please
contact your vendor for further information.
•
Make sure to connect the cables to the correct ports.
•
Place connecting cables carefully so that no one will step on them or stumble over them.
•
Always disconnect all cables from this device before servicing or disassembling.
•
Use ONLY an appropriate power adaptor or cord for your device.
•
Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North America or
230V AC in Europe).
•
Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can
walk on the power adaptor or cord.
•
Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.
•
If the power adaptor or cord is damaged, remove it from the device and the power source.
•
Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.
•
Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of
electric shock from lightning.
•
Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.
•
Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord.
•
Antenna Warning! This device meets ETSI and FCC certification requirements when using the included
antenna(s). Only use the included antenna(s).
Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste
Electronics and Electrical Equipment. It means that used electrical and electronic products should not be
mixed with general waste. Used electrical and electronic equipment should be treated separately.
Page 405 / 412
Index
VMG8924-B10A and VMG8924-B30A Series User’s Guide
405
Index
A
ACK message
256
ACL rule
202
ACS
295
activation
firewalls
199
media server
191
SIP ALG
167
SSID
83
Address Resolution Protocol
277
administrator password
28
AH
229
algorithms
229
alternative subnet mask notation
360
antenna
directional
387
gain
386
omni-directional
387
AP (access point)
377
applications
Internet access
18
media server
190
activation
191
iTunes server
190
applications, NAT
173
ARP Table
277
,
279
authentication
95
,
97
RADIUS server
97
Auto Configuration Server, see ACS
295
B
backup
configuration
313
Basic Service Set, See BSS
375
Basic Service Set, see BSS
blinking LEDs
21
Broadband
45
broadcast
70
BSS
98
,
375
example
98
BYE request
256
C
CA
213
,
381
call history
250
incoming calls
251
outgoing calls
251
call hold
262
,
263
call service mode
261
,
263
call transfer
262
,
264
call waiting
262
,
263
Canonical Format Indicator See CFI
CCMs
317
CE statement
402
certificate
factory default
214
Certificate Authority
See CA.
certificates
213
authentication
213
CA
creating
214
public key
213
replacing
214
storage space
214
Certification Authority
213
Certification Authority. see CA
certifications
401
notices
402
CFI
70
CFM
317
CCMs
317
link trace test
317
loopback test
317
MA
317
MD
317

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top