1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. VMG8924-B30A
    5. /
  5. 62
Page 306 / 412 Scroll up to view Page 301 - 305
Chapter 36 E-mail Notification
VMG8924-B10A and VMG8924-B30A Series User’s Guide
306
36.2.1
Email Notification Edit
Click the
Add
button in the
Email Notification
screen. Use this screen to configure the required
information for sending e-mail via a mail server.
Figure 177
Email Notification > Add
The following table describes the labels in this screen.
Table 146
Email Notification > Add
LABEL
DESCRIPTION
Mail Server
Address
Enter the server name or the IP address of the mail server for the e-mail address specified
in the
Account Email Address
field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Authentication
Username
Enter the user name (up to 32 characters). This is usually the user name of a mail account
you specified in the
Account Email Address
field.
Authentication
Password
Enter the password associated with the user name above.
Account Email
Address
Enter the e-mail address that you want to be in the from/sender line of the e-mail
notification that the Device sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be authenticated
by the mail server as well.
Apply
Click this button to save your changes and return to the previous screen.
Cancel
Click
this button to begin configuring this screen afresh.
Page 307 / 412
VMG8924-B10A and VMG8924-B30A Series User’s Guide
307
C
HAPTER
37
Logs Setting
37.1
Overview
You can configure where the Device sends logs and which logs and/or immediate alerts the Device
records in the
Logs Setting
screen.
37.2
The Log Settings Screen
To change your Device’s log settings, click
Maintenance > Logs
Setting
. The screen appears as
shown.
Figure 178
Maintenance > Logs Setting
Page 308 / 412
Chapter 37 Logs Setting
VMG8924-B10A and VMG8924-B30A Series User’s Guide
308
The following table describes the fields in this screen.
37.2.1
Example E-mail Log
An "End of Log" message displays for each mail in which a complete log has been sent. The
following is an example of a log sent by e-mail.
•
You may edit the subject title.
•
The date format here is Day-Month-Year.
•
The date format here is Month-Day-Year. The time format is Hour-Minute-Second.
Table 147
Maintenance > Logs Setting
LABEL
DESCRIPTION
Syslog Setting
Syslog Logging
The Device sends a log to an external syslog server. Select
Enable
to enable syslog logging.
Mode
Select the syslog destination from the drop-down list box.
If you select
Remote
, the log(s) will be sent to a remote syslog server. If you select
Local
File
, the log(s) will be saved in a local file. If you want to send the log(s) to a remote syslog
server and save it in a local file, select
Local File and Remote
.
Syslog Server
Enter the server name or IP address of the syslog server that will log the selected categories
of logs.
UDP Port
Enter the port number used by the syslog server.
E-mail Log Settings
Mail Server
Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via E-mail.
System Log
Mail Subject
Type a title that you want to be in the subject line of the system log e-mail message that
the Device sends.
Security Log
Mail Subject
Type a title that you want to be in the subject line of the security log e-mail message that
the Device sends.
Send Log to
The Device sends logs to the e-mail address specified in this field. If this field is left blank,
the Device does not send logs via E-mail.
Send Alarm to
Alerts are real-time notifications that are sent as soon as an event, such as a DoS attack,
system error, or forbidden web access attempt occurs. Enter the E-mail address where the
alert messages will be sent. Alerts include system errors, attacks and attempted access to
blocked web sites. If this field is left blank, alert messages will not be sent via E-mail.
Alarm Interval
Specify how often the alarm should be updated.
Allowed
Capacity Before
Email
Set what percent of the Device’s log storage space can be filled before the Device sends a
log e-mail.
Clear log after
sending mail
Select this to delete all the logs after the Device sends an E-mail of the logs.
Active Log and Alert
System Log
Select the categories of system logs that you want to record.
Security Log
Select the categories of security logs that you want to record.
Send
immediate alert
Select log categories for which you want the Device to send E-mail alerts immediately.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 309 / 412
Chapter 37 Logs Setting
VMG8924-B10A and VMG8924-B30A Series User’s Guide
309
• "
End of Log
" message shows that a complete log has been sent.
Figure 179
E-mail Log Example
Subject:
Firewall Alert From
Date:
Fri, 07 Apr 2000 10:05:42
From:
To:
1|
Apr
7 00
|From:192.168.1.1
To:192.168.1.255
|default policy
|forward
|
09:54:03
|UDP
src port:00520 dest port:00520
|<1,00>
|
2|Apr
7 00 |From:192.168.1.131
To:192.168.1.255
|default policy
|forward
| 09:54:17 |UDP
src port:00520 dest port:00520
|<1,00>
|
3|Apr
7 00 |From:192.168.1.6
To:10.10.10.10 |match
|forward
| 09:54:19 |UDP
src port:03516 dest port:00053
|<1,01>
|
……………………………..{snip}…………………………………..
……………………………..{snip}…………………………………..
126|Apr
7 00 |From:192.168.1.1
To:192.168.1.255
|match
|forward
| 10:05:00 |UDP
src port:00520 dest port:00520
|<1,02>
|
127|Apr
7 00 |From:192.168.1.131
To:192.168.1.255
|match
|forward
| 10:05:17 |UDP
src port:00520 dest port:00520
|<1,02>
|
128|Apr
7 00 |From:192.168.1.1
To:192.168.1.255
|match
|forward
| 10:05:30 |UDP
src port:00520 dest port:00520
|<1,02>
|
End of Firewall Log
Page 310 / 412
Chapter 37 Logs Setting
VMG8924-B10A and VMG8924-B30A Series User’s Guide
310

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top