1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. VMG8924-B30A
    5. /
  5. 42
Page 206 / 412 Scroll up to view Page 201 - 205
Chapter 16 MAC Filter
VMG8924-B10A and VMG8924-B30A Series User’s Guide
206
The following table describes the labels in this screen.
Table 91
Security > MAC Filter
LABEL
DESCRIPTION
MAC Address Filter
Select
Enable
to activate the MAC filter function.
Set
This is the index number of the MAC address.
Allow
Select
Allow
to permit access to the Device. MAC addresses not listed will be denied
access to the Device.
If you clear this, the MAC Address field for this set clears.
Host name
Enter the host name of the
wireless or LAN clients that are allowed access to the
Device.
MAC Address
Enter the MAC addresses of the wireless or LAN clients that are allowed access to the
Device in these address fields. Enter the MAC addresses in a valid MAC address format,
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 207 / 412
VMG8924-B10A and VMG8924-B30A Series User’s Guide
207
C
HAPTER
17
Parental Control
17.1
Overview
Parental control allows you to block web sites with the specific URL. You can also define time
periods and days during which the Device performs parental control on a specific user.
17.2
The Parental Control Screen
Use this screen to enable parental control, view the parental control rules and schedules.
Click
Security
>
Parental Control
to open the following screen.
Figure 123
Security > Parental Control
The following table describes the fields in this screen.
Table 92
Security > Parental Control
LABEL
DESCRIPTION
Parental
Control
Select
Enable
to activate parental control.
Add new PCP
Click this if you want to configure a new parental control rule.
#
This shows the index number of the rule.
Status
This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
PCP Name
This shows the name of the rule.
Home Network
User (MAC)
This shows the MAC address of the LAN user’s computer to which this rule applies.
Page 208 / 412
Chapter 17 Parental Control
VMG8924-B10A and VMG8924-B30A Series User’s Guide
208
17.2.1
Add/Edit a Parental Control Rule
Click
Add
new PCP
in the
Parental Control
screen to add a new rule or click the
Edit
icon next to
an existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL
filtering settings to block the users on your network from accessing certain web sites.
Figure 124
Parental Control Rule: Add/Edit
Internet Access
Schedule
This shows the day(s) and time on which parental control is enabled.
Network
Service
This shows whether the network service is configured. If not,
None
will be shown.
Website Block
This shows whether the website block is configured. If not,
None
will be shown.
Modify
Click the
Edit
icon to go to the screen where you can edit the rule.
Click the
Delete
icon to delete an existing rule.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Table 92
Security > Parental Control (continued)
LABEL
DESCRIPTION
Page 209 / 412
Chapter 17 Parental Control
VMG8924-B10A and VMG8924-B30A Series User’s Guide
209
The following table describes the fields in this screen.
Table 93
Parental Control Rule: Add/Edit
LABEL
DESCRIPTION
General
Active
Select the checkbox to activate this parental control rule.
Parental
Control Profile
Name
Enter a descriptive name for the rule.
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select
Custom
, enter the LAN user’s MAC address. If you select
All
, the rule applies to all
LAN users.
Internet Access Schedule
Day
Select check boxes for the days that you want the Device to perform parental control.
Time
Drag the time bar to define the time that the LAN user is allowed access.
Network Service
Network
Service Setting
If you select
Block
, the Device prohibits the users from viewing the Web sites with the URLs
listed below.
If you select
Allow
, the Device blocks access to all URLs except ones listed below.
Add new
service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name
,
Protocol
, and
Name
of the new rule.
#
This shows the index number of the rule. Select the checkbox next to the rule to activate it.
Service Name
This shows the name of the rule.
Protocol:Port
This shows the protocol and the port of the rule.
Modify
Click the
Edit
icon to go to the screen where you can edit the rule.
Click the
Delete
icon to delete an existing rule.
Blocked Site/
URL Keyword
Click
Add
to show a screen to enter the URL of web site or URL keyword to which the Device
blocks access. Click
Delete
to remove it.
Apply
Click this button to save your settings back to the Device.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 210 / 412
Chapter 17 Parental Control
VMG8924-B10A and VMG8924-B30A Series User’s Guide
210

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top