Page 36 / 412
Scroll up to view Page 31 - 35
Chapter 3 Quick Start
VMG8924-B10A and VMG8924-B30A Series User’s Guide
36
2
Enter your Internet connection information in this screen. The screen and fields to enter may vary
depending on your current connection type. Click
Next
. Click
Next
.
Figure 13
Internet Connection
3
Turn the wireless LAN on or off. If you keep it on, record the security settings so you can configure
your wireless clients to connect to the Device. Click
Save
.
Figure 14
Internet Connection
4
Your Device saves your settings and attempts to connect to the Internet.
Page 39 / 412
VMG8924-B10A and VMG8924-B30A Series User’s Guide
39
C
HAPTER
4
Network Map and Status Screens
4.1
Overview
After you log into the Web Configurator, the
Network Map
screen appears. This shows the network
connection status of the Device and clients connected to it.
You can use the
Status
screen to look at the current status of the Device, system resources, and
interfaces (LAN, WAN, and WLAN).
4.2
The Network Map Screen
Use this screen to view the network connection status of the device and its clients. A warning
message appears if there is a connection problem.
Figure 15
Network Map: Icon View Mode
Page 40 / 412
Chapter 4 Network Map and Status Screens
VMG8924-B10A and VMG8924-B30A Series User’s Guide
40
If you want to view information about a client, click the client’s name and
Info
. Click the IP address
if you want to change it. If you want to change the name or icon of the client, click
Change name/
icon
.
If you prefer to view the status in a list, click
List View
in the
Viewing mode
selection box. You
can configure how often you want the Device to update this screen in
Refresh interval
.
Figure 16
Network Map: List View Mode
4.3
The Status Screen
Use this screen to view the status of the Device. Click
Status
to open this screen.
Figure 17
Status Screen
19216811.live