Page 31 / 404 Scroll up to view Page 26 - 30
Chapter 2 The Web Configurator
VMG8324-B10A / VMG8324-B30A Series User’s Guide
31
Parental
Control
Use this screen to block web sites with the specific URL.
Scheduler
Rules
Use this screen to configure the days and times when a configured
restriction (such as parental control) is enforced.
Certificates
Local Certificates
Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Trusted CA
Use this screen to view and manage the list of the trusted CAs.
IPSec VPN
Setup
Use this screen to add or edit VPN policies.
Monitor
Use this screen to view the status of all IPSec VPN tunnels. You can
also manually initiate a tunnel in this screen.
VoIP
SIP
SIP Account
Use this screen to set up information about your SIP account and
configure audio settings such as volume levels for the phones
connected to the ZyXEL Device.
SIP Service
Provider
Use this screen to configure your ZyXEL Device’s Voice over IP
settings.
Phone
Use this screen to select your location and a call service mode.
Call Rule
Use this screen to configure speed dial for SIP phone numbers that
you call often.
Call History
Call History
Summary
Use this screen to view a call history list.
Call History
Outgoing
Use this screen to view detailed information for each outgoing call
you made.
Call History
Incoming
Use this screen to view detailed information for each incoming call
from someone calling you.
Line Test
This screen is only available for supervisors. Use this screen to do
various tests for a phone line.
System Monitor
Log
System Log
Use this screen to view the status of events that occurred to the
Device. You can export or e-mail the logs.
Security Log
Use this screen to view the login record of the Device. You can export
or e-mail the logs.
Traffic Status
WAN
Use this screen to view the status of all network traffic going through
the WAN port of the Device.
LAN
Use this screen to view the status of all network traffic going through
the LAN ports of the Device.
NAT
Use this screen to view NAT statistics for connected hosts.
VoIP Status
Use this screen to view VoIP registration, current call statust and
phone numbers for the phone ports.
ARP Table
Use this screen to view the ARP table. It displays the IP and MAC
address of each DHCP connection.
Routing Table
Use this screen to view the routing table on the Device.
IGMP/MLD
Group Status
Use this screen to view the status of all IGMP settings on the Device.
xDSL Statistics
Use this screen to view the Device’s xDSL traffic statistics.
3G Statistics
Use this screen to look at 3G Internet connection status.
Maintenance
Table 3
Navigation Panel Summary (continued)
LINK
TAB
FUNCTION
Page 32 / 404
Chapter 2 The Web Configurator
VMG8324-B10A / VMG8324-B30A Series User’s Guide
32
User Account
Use this screen to change user password on the Device.
Remote MGMT
Use this screen to enable specific traffic directions for network
services.
TR-069 Client
Use this screen to configure the Device to be managed by an Auto
Configuration Server (ACS).
TR-064
Use this screen to enable management via TR-064 on the LAN.
SNMP
Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Time
Use this screen to change your Device’s time and date.
Email
Notification
Use this screen to configure up to two mail servers and sender
addresses on the Device.
Log Setting
Use this screen to change your Device’s log settings.
Firmware
Upgrade
Use this screen to upload firmware to your device.
Configuration
Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Reboot
Use this screen to reboot the Device without turning the power off.
Diagnostic
Ping &
Traceroute &
Nslookup
Use this screen to identify problems with the DSL connection. You can
use Ping, TraceRoute, or Nslookup to help you identify problems.
802.1ag
Use this screen to configure CFM (Connectivity Fault Management)
MD (maintenance domain) and MA (maintenance association),
perform connectivity tests and view test reports.
OAM Ping
Use this screen to view information to help you identify problems with
the DSL connection.
Table 3
Navigation Panel Summary (continued)
LINK
TAB
FUNCTION
Page 33 / 404
VMG8324-B10A / VMG8324-B30A Series User’s Guide
33
C
HAPTER
3
Quick Start
3.1
Overview
Use the Quick Start screens to configure the Device’s time zone, basic Internet access, and wireless
settings.
Note: See the technical reference chapters (starting on
page 35
) for background
information on the features in this chapter.
3.2
Quick Start Setup
1
The Quick Start Wizard appears automatically after login. Or you can click the
Click Start
icon in
the top right corner of the web configurator
to open the quick start screens. Select the time zone of
the Device’s location and click
Next
.
Figure 12
Time Zone
Page 34 / 404
Chapter 3 Quick Start
VMG8324-B10A / VMG8324-B30A Series User’s Guide
34
2
Enter your Internet connection information in this screen. The screen and fields to enter may vary
depending on your current connection type. Click
Next
. Click
Next
.
Figure 13
Internet Connection
3
Turn the wireless LAN on or off. If you keep it on, record the security settings so you can configure
your wireless clients to connect to the Device. Click
Save
.
Figure 14
Internet Connection
4
Your Device saves your settings and attempts to connect to the Internet.
Page 35 / 404
35
P
ART
II
Technical Reference

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top