1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. VMG3926-B10A
    5. /
  5. 41
Page 201 / 327 Scroll up to view Page 196 - 200
VMG3926-B10A User’s Guide
201
C
HAPTER
17
MAC Filter
17.1
Overview
You can configure the VMG to permit access to clients based on their MAC addresses in the
MAC
Filter
screen. This applies to wired and wireless connections. Every Ethernet device has a unique
MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC
addresses of the devices to configure this screen.
17.2
The MAC Filter Screen
Use this screen to allow wireless and LAN clients access to the VMG. Click
Security
>
MAC Filter
.
The screen appears as shown.
Figure 113
Security > MAC Filter
Page 202 / 327
Chapter 17 MAC Filter
VMG3926-B10A User’s Guide
202
The following table describes the labels in this screen.
Table 85
Security > MAC Filter
LABEL
DESCRIPTION
MAC Address Filter
Select
Enable
to activate the MAC filter function.
MAC Restrict Mode
Select
Allow
to only permit the listed MAC addresses access to the VMG. Select
Deny
to permit anyone access to the VMG except the listed MAC addresses.
Set
This is the index number of the MAC address.
Allow
Select
Allow
to enable the MAC filter rule. . The rule will not be applied if
Allow
is not
selected.
Host Name
Enter the host name of the
wireless or LAN clients that are allowed access to the VMG.
MAC Address
Enter the MAC addresses of the wireless or LAN clients that are allowed access to the
VMG in these address fields. Enter the MAC addresses in a valid MAC address format,
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 203 / 327
VMG3926-B10A User’s Guide
203
C
HAPTER
18
Parental Control
18.1
Overview
Parental control allows you to block web sites with the specific URL. You can also define time
periods and days during which the VMG performs parental control on a specific user.
18.2
The Parental Control Screen
Use this screen to enable parental control, view the parental control rules and schedules.
Click
Security
>
Parental Control
to open the following screen.
Figure 114
Security > Parental Control
The following table describes the fields in this screen.
Table 86
Security > Parental Control
LABEL
DESCRIPTION
Parental
Control
Select
Enable
to activate parental control.
Add new PCP
Click this if you want to configure a new Parental Control Profile (PCP).
#
This shows the index number of the rule.
Status
This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
PCP Name
This shows the name of the rule.
Home Network
User (MAC)
This shows the MAC address of the LAN user’s computer to which this rule applies.
Internet Access
Schedule
This shows the day(s) and time on which parental control is enabled.
Network
Service
This shows whether the network service is configured. If not,
None
will be shown.
Website Block
This shows whether the website block is configured. If not,
None
will be shown.
Page 204 / 327
Chapter 18 Parental Control
VMG3926-B10A User’s Guide
204
18.2.1
Add/Edit a Parental Control Profile
Click
Add
new PCP
in the
Parental Control
screen to add a new rule or click the
Edit
icon next to
an existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL
filtering settings to block the users on your network from accessing certain web sites.
Figure 115
Parental Control Rule: Add/Edit Rule
Modify
Click the
Edit
icon to go to the screen where you can edit the rule.
Click the
Delete
icon to delete an existing rule.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Table 86
Security > Parental Control (continued)
LABEL
DESCRIPTION
Page 205 / 327
Chapter 18 Parental Control
VMG3926-B10A User’s Guide
205
Figure 116
Parental Control Rule: Add/Edit Rule > Add Service
Figure 117
Parental Control Rule: Add/Edit Rule > Add Keyword
The following table describes the fields in this screen.
Table 87
Parental Control Rule: Add/Edit
LABEL
DESCRIPTION
General
Active
Select the checkbox to activate this parental control rule.
Parental
Control Profile
Name
Enter a descriptive name for the rule.
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select
Custom
, enter the LAN user’s MAC address. If you select
All
, the rule applies to all
LAN users.
Rule List
In
Home Network User
, select
Custom
, enter the LAN user’s MAC address, then click the
+
sign to enter a computer MAC address for this PCP. Up to five are allowed. Click the
-
sign
to remove one.
Internet Access Schedule
Day
Select check boxes for the days that you want the VMG to perform parental control.
Time
Drag the time bar to define the time that the LAN user is allowed access (
Authorized
access
) or denied access (
No access
). Click the
+
sign above the time bar to add a new
time bar. Up to three are allowed.
Authorized
access
Select this to allow access for the times defined above.
No access
Select this to deny access for the times defined above.

Rate

3.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top