Page 96 / 300
Scroll up to view Page 91 - 95
Chapter 8 Security
P-663HN-51 User’s Guide
96
8.4
Adding Incoming IP Filtering Rules
To add an incoming IP filtering rule, click
Advanced Setup > Security > IP
Filtering > Incoming > Add
. The screen appears as shown.
Figure 45
Advanced Setup > Security > IP Filtering > Incoming > Add
The following table describes the labels in this menu.
Add
Click this button to go to a screen where you can configure settings for a
new entry.
Remove
To remove a WAN connection, select its
Remove
check box and click the
Remove
button.
Table 30
Advanced Setup > Security > IP Filtering > Incoming
LABEL
DESCRIPTION
Table 31
Advanced Setup > Security > IP Filtering > Incoming > Add
LABEL
DESCRIPTION
Filter Name
Type the name configured to identify the filter entry.
Protocol
Select the type of packets to which this entry applies (TCP, UDP, or
both).
Source IP
Address
Type the IP address of a computer on the Internet to which this entry
applies.
Source
Subnet Mask
Type the subnet mask of a computer on the Internet to which this entry
applies.
Source Port
Type the source port for traffic (from the Internet) to which this entry
applies.
Page 97 / 300
Chapter 8 Security
P-663HN-51 User’s Guide
97
Destination IP
Address
This is the IP address and subnet mask of a LAN computer to which this
entry allows access.
Destination
Subnet Mask
Type the subnet mask of the LAN computer to which this entry applies.
Destination
Port
Type the destination port for traffic to which this entry applies.
WAN
Interfaces
Select the WAN interface(s) to which this rule applies.
Save/Apply
Click this button to save the changes and have the ZyXEL Device start
using them.
Table 31
Advanced Setup > Security > IP Filtering > Incoming > Add
LABEL
DESCRIPTION
Page 99 / 300
P-663HN-51 User’s Guide
99
C
HAPTER
9
Parental Control (Blocking
Schedule)
Click
Advanced Setup > Security > Parental Control
to display the following
screen. This screen shows policies controlling which days and times Internet
access is blocked from specific MAC addresses.
Figure 46
Advanced Setup > Security > Parental Control
The following table describes the labels in this screen.
Table 32
Advanced Setup > Security > Parental Control
LABEL
DESCRIPTION
Username
This name identifies to whom the blocking schedule applies.
MAC
This is the MAC address of the computer to which this blocking
schedule applies.
Mon ~ Sun
These fields show to which days of the week the blocking schedule
applies.
Start
This is the beginning time for the blocked access period.
Stop
This is the ending time for the blocked access period.
Add
Click this button to go to a screen where you can configure settings
for a new entry.
Remove
To remove an entry, select its
Remove
check box and click the
Remove
button.
Page 100 / 300
Chapter 9 Parental Control (Blocking Schedule)
P-663HN-51 User’s Guide
100
9.1
Adding Parental Control (Blocking Schedule)
Entries
Click
Advanced Setup > Security > Parental Control > Add
to display the
following screen. Use this screen to configure which days and times Internet
access is blocked from a specific MAC address.
Figure 47
Advanced Setup > Security > Parental Control > Add
The following table describes the labels in this screen.
Table 33
Advanced Setup > Security > Parental Control > Add
LABEL
DESCRIPTION
Username
Enter a name to identify to whom the blocking schedule applies.
Browser’s MAC
Select this to use the MAC address of the computer you are currently
using to manage the ZyXEL Device.
Other MAC
Address
Select this to manually enter the MAC address of a computer.
Days of the week
Select to which days of the week the blocking schedule applies.
Start Blocking
Time
This is the beginning time for the blocking period. Include a two-digit
number of hours followed by a colon and a. two-digit number of
hours.
19216811.live