Zyxel P660-RT-1-v3s Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Zyxel P660-RT-1-v3s router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 12
www.zyxel.com
QUICK START GUIDE
P-660R-T1 v3
ADSL2+ Access Router
Firmware v3.40
Edition 1, 09/2008
DEFAULT LOGIN DETAILS
IP Address:
Username:
admin
Password:
1234
Copyright
2008 ZyXEL Communications Corporation
C
Page 2 / 12
2
Front and Rear Panels
POWER
LED
ETHERNET
LED
DSL
LED
INTERNET
ON/OFF
RESET
POWER
ETHERNET
PORT
DSL
PORT
LED
Page 3 / 12
ENGLISH
P-660R-T1 v3
3
Introduction
The P-660R-T1 v3 is a high performance ADSL2+ router which combines
high-speed Internet access and a firewall capability.
How It Works
A computer can connect to the P-660R-T1 v3 using an Ethernet cable (a).
The P-660R-T1 v3 then connects to the Internet (b), providing you with
seamless access to the world’s content.
Overview
Hardware Connections
, on page
5
Internet Setup
, on page
7
a
b
DSL
Page 4 / 12
ENGLISH
4
Before You Begin
Make sure you have the following things before you set up your P-660R-T1
v3.
Internet access - account information provided by your ISP, such as
username, password, and so on.
Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with
JavaScript enabled.
See the User’s Guide for all configuration details. To read the User’s Guide,
insert the CD that came in the box into your CD-ROM drive. A screen should
pop up. Navigate to the User’s Guide from this screen. If a screen does not
pop up, open Windows Explorer (click My Computer), click on the CD-ROM
drive (usually drive D) and navigate to it from there.
Page 5 / 12
ENGLISH
P-660R-T1 v3
5
Hardware Connections
1.
DSL
: Use a telephone wire to connect this port to a telephone jack.
2.
ETHERNET
: Use an Ethernet cable to connect a computer to this
port for
initial configuration and/or Internet access.
3.
POWER
: Use the power adaptor provided with your P-660R-T1 v3 to
connect an appropriate power source to this socket.
4.
Push the power switch to the on position.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top