19216811.liveP-660R-T1/T3 v2 Quick Start Guide
10
2
If you cannot access the Internet when your computer is
connected to the
ETHERNET
port, follow these steps.
A)
Check the lights on the front panel. If they are different
from what is described in section
1
, make sure the
connections are correct. If the lights are still different,
turn off the device, wait a few seconds, and turn it on
again.
B)
Follow the steps in
Set Up Internet Access
section again.
Make sure you enter the correct information. For
example, if your account has a user name and
password, make sure you type it correctly. In addition, if
you are not sure which encapsulation your ISP uses,
contact your ISP.
C)
If you are using a new Internet account, contact your
ISP to make sure it is active.
D)
If you still have problems, see
Troubleshooting
in the
User’s Guide.
Set Up Your Computer’s IP Address
This section shows you how to set your Windows NT/2000/XP
computer to automatically get an IP address. This ensures
that your computer can connect with your P-660R-T1/T3 v2.
Refer to your User’s Guide for detailed IP address
configuration for other Windows and Macintosh computer
operating systems.
1
Click
start
(
Start
in Windows 2000/NT) >
Settings
>
Control Panel
.