Zyxel P-660HW-T1-v3 eircom Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Zyxel P-660HW-T1-v3 eircom router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 6
P-660HW-T v2
802.11g Wireless ADSL 2+ 4-port Gateway
Quick Start Guide
Version 3.40
6/2006
Edition 1
Page 2 / 6
P-660HW-T v2 Quick Start Guide
2
Overview
The P-660HW-T v2 is an ADSL router with a four-port built-in Ethernet switch and IEEE 802.11b/g wireless
capability. The P-660HW-T v2 allows wired and wireless clients to safely access the Internet.
See your
User’s Guide
for background information on all features.
How to use the included CD
This CD provides multi-media animations that help you set up your P-660HW-T v2.
1
On the included CD, click
Multimedia Auto Provisioner > Installation Tutorial
.
2
At the end of the tutorial, click
Configuration Genie
.
1 Hardware Connections
If you prefer to see a multi-media animation of how to make hardware connections, see the installation tutorial
on the included CD.
1 DSL
: Use a telephone wire to connect your P-660HW-T v2’s
DSL
port to a telephone jack (or to a splitter, if
one is already installed).
Page 3 / 6
P-660HW-T v2 Quick Start Guide
3
2 ETHERNET
: Use an Ethernet cable to connect a computer to an
ETHERNET
port for initial configuration
and/or Internet access.
3 POWER
: Use the power adaptor provided with your P-660HW-T v2 to connect an appropriate power
source to the
POWER
socket. Make sure the power source is on.
4
Push in the
POWER
button. Look at the lights on the front panel.
• The
POWER
light blinks while your P-660HW-T v2 starts up and stays on once it is ready. The
DSL
light is on
when the P-660HW-T v2 has a DSL connection, and the
WLAN
light is on when the wireless LAN is ready. The
INTERNET
light is on when you are able to access the Internet and blinks when the P-660HW-T v2 is sending
or receiving data.
• Each
ETHERNET
light stays on if the corresponding
ETHERNET
port is properly connected and blinks when
there is traffic.
If any of these lights are not on, check your connections, and inspect your cables for damage. If the lights are
19216811.live