1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-660HN-T1A
    5. /
  5. 41
Page 201 / 324 Scroll up to view Page 196 - 200
Chapter 17 Universal Plug-and-Play (UPnP)
P-660HN-TxA User’s Guide
201
3
Select
My Network Places
under
Other Places
.
Network Connections
4
An icon with the description for each UPnP-enabled device displays under
Local
Network
.
Page 202 / 324
Chapter 17 Universal Plug-and-Play (UPnP)
P-660HN-TxA User’s Guide
202
5
Right-click on the icon for your ZyXEL Device and select
Invoke
. The web
configurator login screen displays.
Network Connections: My Network Places
6
Right-click on the icon for your ZyXEL Device and select
Properties
. A properties
window displays with basic information about the ZyXEL Device.
Network Connections: My Network Places: Properties: Example
Page 203 / 324
P-660HN-TxA User’s Guide
203
C
HAPTER
18
CWMP
18.1
Overview
The ZyXEL Device supports TR-069 Amendment 1 (CPE WAN Management
Protocol
Release 2.0) and TR-069 Amendment 2 (CPE WAN Management Protocol
v1.1, Release 3.0).
TR-069 is a protocol that defines how your ZyXEL Device (
ZD
) can be managed
via a management server (
MS
) such as ZyXEL’s Vantage Access.
Figure 97
LAN and WAN
An administrator can use a management server to remotely set up the ZyXEL
device, modify settings, perform firmware upgrades as well as monitor and
diagnose the ZyXEL device.
In order to use CWMP, you need to configure the following steps:
1
Activate CWMP
2
Specify the URL, username and password.
3
Activate periodic inform and specify an interval value.
MS
ZD
Page 204 / 324
Chapter 18 CWMP
P-660HN-TxA User’s Guide
204
18.2
The CWMP Setup Screen
Use this screen to configure your ZyXEL Device to be managed by a management
server. Click
Advanced
>
CWMP
to display the following screen.
Figure 98
Advanced > CWMP
The following table describes the fields in this screen.
Table 70
Advanced > CWMP
LINK
DESCRIPTION
CWMP Setup
CWMP
Select
Activated
to allow the ZyXEL Device to be managed by a
management server or select
Deactivated
to not allow the ZyXEL Device
to be managed by a management server.
Login ACS
Configure this part of the screen to log into the management server.
URL
Type the IP address or domain name of the management server. If the
ZyXEL Device is behind a NAT router that assigns it a private IP address,
you will have to configure a NAT port forwarding rule on the NAT router.
User Name
The user name is used to authenticate the ZyXEL Device when making a
connection to the management server. This user name on the management
server and the ZyXEL Device must be the same. Type a user name of up to
255 printable characters found on an English-language keyboard. Spaces
and characters such as @#$%^&*()_+ are allowed.
Page 205 / 324
Chapter 18 CWMP
P-660HN-TxA User’s Guide
205
Password
The password is used to authenticate the ZyXEL Device when making a
connection to the management server. This password on the management
server and the ZyXEL Device must be the same. Type a password of up to
255 printable characters found on an English-language keyboard.
Connection
Request
Use this part of the screen to allow the management server to connect to
the ZyXEL Device after a successful login.
Path
Type the IP address or domain name of the ZyXEL Device. The
management server uses this path to verify the ZyXEL Device.
Port
The default port for access to the ZyXEL Device from the management
server is the HTTP port, port 80. If you change it, make sure it does not
conflict with another port on your network and it is recommended to use a
port number above 1024 (not a commonly used port). The management
server should use this port to connect to the ZyXEL Device. You may need
to alter your NAT port forwarding rules if they were already configured.
UserName
The user name is used to authenticate the management server when
connecting to the ZyXEL Device. Type a user name of up to 255 printable
characters found on an English-language keyboard. Spaces and characters
such as @#$%^&*()_+ are allowed.
Password
The password is used to authenticate the management server when
connecting to the ZyXEL Device. Type a password of up to 255 printable
characters found on an English-language keyboard. Spaces are not
allowed.
Periodic
Inform
Select
Activated
to have the ZyXEL Device periodically send information to
the management server (recommended if CWMP is enabled) or select
Deactivated
to not have the ZyXEL Device periodically send information to
the management server
Interval
The interval is the duration in seconds for which the ZyXEL Device must
attempt to connect with the management server to send information and
check for configuration updates. Enter a value between 1 and 86400
seconds.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Table 70
Advanced > CWMP (continued)
LINK
DESCRIPTION

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top