1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-330W
    5. /
  5. 18
Page 86 / 141 Scroll up to view Page 81 - 85
ZyXEL P-330W User’s Guide
Chapter 6 Advanced Options
86
6.8
Ping
The Ping screen allows you to send out PING requests from your P-330W to a network
address you specify and then reports back the test result.
You can use this command to help
diagnose network problems.
To access the Ping command, click
ADVANCED
then the
Ping
link. The screen appears as
shown.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the User Name above.
Idle Time
The amount of time before the L2TP session times out and drops connection.
MTU Size
Enter in the maximum MTU (packet size) here.
Attain DNS
Automatically
Select this if your ISP assigns you a DNS server at the same time it assigns
you an IP Address.
Set DNS Manually
Use this if your ISP does not assign a DNSP server when it assigns you an IP
address.
DNS 1 - 3
Enter in your ISP’s DNS server IP address here.
You must enter in 1.
Clone MAC Address
Your ISP may require a particular MAC address in order for you to connect to
the Internet. This MAC address is the PC’s MAC address that your ISP had
originally connected your Internet connection to. Type in this Clone MAC
address in this section to replace the WAN MAC address with the MAC
address of that PC.
Respond to WAN Ping
Put a check in this box to reply to ping packets.
Enable UPnP
UPnP (Universal Plug and Play) allows automatic discovery and configuration
of the Wireless Router. UPnP is by supported by Windows ME, XP, or later.
Put a check in this box to allow the router configuration to be changed by
UPnP devices.
IPSec Passthrough
Put a check in this box to enable computers on your LAN to make IPSec VPN
connections to servers on the Internet.
PPTP Passthrough
Put a check in this box to enable computers on your LAN to make PPTP VPN
connections to servers on the Internet.
L2TP Passthrough
Put a check in this box to enable computers on your LAN to make L2TP VPN
connections to servers on the Internet.
Save
Click
Save
to save your changes back to the P-330W.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 37
Advanced: WAN L2PT Encapsulation
LABEL
DESCRIPTION
Page 87 / 141
ZyXEL P-330W User’s Guide
87
Chapter 6 Advanced Options
Figure 51
Advanced: Ping
The following table describes the labels in this screen.
6.9
DoS Setting
DoS (Denial of Service) attacks can flood your Internet connection with invalid packets and
connection requests, using so much bandwidth and so many resources that Internet access
becomes unavailable. The Wireless Router incorporates protection against DoS attacks. This
screen allows you to configure DoS protection.
To access the DoS settings, click
ADVANCED
then the
DoS
link. The screen appears as
shown.
Table 38
Advanced: Ping
LABEL
DESCRIPTION
IP Address /
Host Name
Enter in a host name or IP address that you would like to ping.
Run
Performs the Ping command.
Reset
Click
Reset
to begin configuring this screen afresh.
Response
The results of your ping request will show up here.
Page 88 / 141
ZyXEL P-330W User’s Guide
Chapter 6 Advanced Options
88
Figure 52
Advanced: DoS
The following table describes the labels in this screen.
6.10
Diagnostics
This screen allows you to perform a DNS lookup on any host name you enter.
This can be
used to help diagnose network problems.
Table 39
Advanced: DoS
LABEL
DESCRIPTION
Enable DoS
Protection
Put a check in this box to enable DoS protection.
Select All
Puts a check next to all DoS protection services.
Clear All
Resets all check boxes to blank.
Apply Changes
Applies DoS protections.
Page 89 / 141
ZyXEL P-330W User’s Guide
89
Chapter 6 Advanced Options
To access the Diagnostic service, click
ADVANCED
then the
DIAGNOSTIC
link. The
screen appears as shown.
Figure 53
Advanced: Diagnostic
The following table describes the labels in this screen.
Table 40
Advanced: Diagnostic
LABEL
DESCRIPTION
Domain Name/
URL
Enter the domain name you want to lookup.
Start Lookup
Click this button to activate the DNS lookup.
Page 90 / 141
ZyXEL P-330W User’s Guide
Chapter 7 Administrator Options
90
C
HAPTER
7
Administrator Options
7.1
Remote Management
Remote management allows you to remotely configure your P-330W over your Internet
connection.
Since this is a potential security risk, this feature is turned off by default.
To access the
Remote Management
configuration screen, click
ADMINISTRATOR
then
the
REMOTE MANAGEMENT
link. The screen appears as shown.
Figure 54
Administrator: Remote Management
The following table describes the labels in this screen.
7.2
Configuration Screen
Click
Administrator
, and then the
Config File
link. The screen you are presented with is
next.
Table 41
Administrator: Remote Management
LABEL
DESCRIPTION
Enable Web
Server Access
via WAN
Put a check in this box to allow your P-330W to be accessed over the Internet.
Port Number
Enter in the port number you want the P-330W to respond on when accessed from
the Internet.
Save
Click
Save
to save your changes back to the P-330W.
Reset
Click
Reset
to begin configuring this screen afresh.

Rate

3.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top