Zyxel P324 Router Manual PDF (Setup & Configuration Guide)

Page 96 / 285 Scroll up to view Page 91 - 95

Page 97 / 285

II

P

a

r

t

I

:

Advanced Applications

This section describes the advanced applications of your Prestige, such as NAT, Remote Node

Setup and IP Static Route Setup.

Page 98 / 285

Prestige 324 Intelligent Broadband Sharing Gateway

Remote Node Setup

9-1

Chapter 9

Remote Node Setup

This chapter shows you how to configure menu 11 and all its sub-menus including traffic redirect.

9.1

Introduction

A remote node is required for placing calls to a remote gateway. A remote node represents both the remote

gateway and the network behind it across a WAN connection. Note that when you use menu 4 to set up

Internet access, you are actually configuring a remote node. We will show you how to configure

Menu

11.1 Remote Node Profile, Menu 11.3 - Remote Node Network Layer Options

and

Menu 11.5 -

Remote Node Filter

.

9.2

Remote Node Profile

From the main menu, select option 11 to display

Menu 11.1 - Remote Node Profile

. There are three

variations of this menu depending on whether you choose

Ethernet

Encapsulation, PPTP

or

PPPoE

Encapsulation.

9.2.1 Ethernet Encapsulation

Choose the

Ethernet

option when the WAN port is used as a regular Ethernet. The first menu 11.1 screen

you see is for

Ethernet

Encapsulation

shown next.

Page 99 / 285

9-2

Remote Node Setup

Figure 9-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation

Table 9-1 Fields in Menu 11.1 (Ethernet Encapsulation)

FIELD

DESCRIPTION

EXAMPLE

Rem Node

Name

Enter a descriptive name for the remote node. This field can be up to eight

characters.

LAoffice

Active

Press [SPACE BAR] to select

Yes

(activate remote node) or

No

(deactivate remote node).

Yes

Encapsulation

Ethernet

is the default encapsulation. Press [SPACE BAR] if you wish to

change to

PPPoE

or

PPTP

encapsulation.

Ethernet

Service Type

Press [SPACE BAR] to select from

Standard

,

RR-Toshiba

(RoadRunner Toshiba authentication method),

RR-Manager

(RoadRunner Manager authentication method) or,

RR-Telstra

(RoadRunner Telstra authentication method). Choose one of the

RoadRunner methods if your ISP is Time Warner's RoadRunner;

otherwise choose

Standard

.

Standard

Service Type

Press [SPACE BAR] to select from

Standard

,

RR-Toshiba

(RoadRunner

Toshiba authentication method),

RR-Manager

(RoadRunner Manager

authentication method) or,

RR-Telstra

(RoadRunner Telstra

authentication method). Choose one of the RoadRunner methods if your

ISP is Time Warner's RoadRunner; otherwise choose

Standard

.

Standard

Note: xDSL users must choose the

Standard

option only. The

Server IP

,

My Login IP

and

My Password

fields are not applicable in this case.

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe

Route= IP

Active= Yes

Encapsulation= Ethernet

Edit IP= No

Service Type= Standard

Session Options:

Service Name= N/A

Edit Filter Sets= No

Outgoing:

My Login= N/A

Edit Traffic Redirect= No

My Password= N/A

Server IP= N/A

Press ENTER to Confirm or ESC to Cancel.

Page 100 / 285

Prestige 324 Intelligent Broadband Sharing Gateway

Remote Node Setup

9-3

Table 9-1 Fields in Menu 11.1 (Ethernet Encapsulation)

FIELD

DESCRIPTION

EXAMPLE

Service Name

This is valid only when you have chosen

PPPoE

encapsulation. If you are

using

PPPoE

encapsulation, then type the name of your PPPoE service

here.

poellc

Outgoing

My Login

This field is applicable for

PPPoE

encapsulation only. Enter the login

name assigned by your ISP when the Prestige calls this remote node.

Some ISPs append this field to the

Service Name

field above (e.g.,

jim@poellc) to access the PPPoE server.

jim

My Password

Enter the password assigned by your ISP when the Prestige calls this

remote node. Valid for

PPPoE

encapsulation only.

*****

Server IP

This field is valid for RoadRunner service type only. The Prestige will find

the RoadRunner Server IP automatically if this field is left blank. If it does

not, then you must enter the authentication server IP address here.

Route

This field refers to the protocol that will be routed by your Prestige – IP is

the only option for the Prestige 10.

IP

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select

Yes

and press [ENTER] to go to M

enu 11.3 - Remote Node Network Layer

Options

.

Yes

Session

Options

Edit Filter

sets

This field leads to another “hidden” menu. Use the [SPACE BAR] to select

Yes

and press [ENTER] to open menu 11.5 to edit the filter sets. See the

Remote Node Filter

section for more details.

Yes

Once you have configured the Remote Node Profile Menu, press [ENTER] to return to menu 11. Press

[ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at any time

to cancel.

9.2.2 PPTP Encapsulation

If you change the

Encapsulation

to

PPTP

in

Menu 11.1

, then you will see the next screen. Please see the

appendix for information.

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share