Page 6 / 12 Scroll up to view Page 1 - 5
6
6.
Use the power adaptor provided with your P-2812HNU(L)-Fx Series
to connect an appropriate power source to this socket.
7.
Push the
POWER
button to the
ON
position.
Look at the LEDs (lights) on the front panel of the P-2812HNU(L)-Fx
Series:
• The
POWER
light blinks during start-up and stays on once the P-
2812HNU(L)-Fx Series is ready.
• The
ETHERNET
light turns on if the corresponding
ETHERNET
port
is properly connected and it blinks when there is traffic. If you do not
connect a computer correctly to any of these ports, the
ETHERNET
lights will not turn on.
• The
WLAN/WPS
light stays on and green when the wireless LAN is
ready.The light will not turn on if the wireless connection is not
activated. It is blue when WPS configured.
• The
DSL
light will stay on if a physical
DSL
connection exists.
• The
WAN
light stays on if a physical Ethernet connection to the WAN
exists. It blinks when transmitting data.
• The
INTERNET
light is green when Internet access is available. It
blinks when transmitting data.
• The
PHONE
lights stay on when your SIP account is registered and
they blink if the receiver is off the hook.
• The
USB
light(s) turn on when there is a USB device (printer or
memory stick) or a 3G adapter connected to the P-2812HNU(L)-Fx
Series and blinks when transmitting data.
If the
POWER
light does not turn on during start up, try turning the P-2812HNU(L)-
Fx Series off, check the connections, wait a few seconds and then turn it back on. If
the problem persists, you may have a hardware problem and you need to contact
your vendor.
Page 7 / 12
7
Internet Access Setup
If you are using a
DSL
connection and you have Internet access, the
DSL
and
INTERNET
lights will be on.
If you are using an
Ethernet WAN
connection and you have Internet
access, the
WAN
and
INTERNET
lights will be on.
Open your web browser and go to http://www.zyxel.com
. You may be
prompted to enter your username and password when attempting to browse.
If the
DSL
or
WAN
lights are not on, try turning the P-2812HNU(L)-
Fx Series off, check the connections, wait a few seconds and then
turn it back on. If the
DSL
or
WAN
lights are still not on, contact your
service provider.
If the
DSL
or
WAN
lights are on, but the
INTERNET
light is off, you
may need to enter your Internet access configuration using the Web
Configurator - see page
10
.
Setting Up a Wireless Connection
If you want to set up a wireless connection using the P-2812HNU(L)-Fx
Series, you can use the wireless SSID (network name) and the
encryption key located in the back panel.
If you wish to use WPS (Wi-Fi Protected Setup), please refer to the
User’s Guide.
Setting Up a Wireless Connection using the
Information on the Label
The wireless function on your device is disabled by default. Press the P-
2812HNU(L)-Fx Series’
WLAN ON/OFF
at the top panel for 1 second to
turn this function on or off.
Page 8 / 12
8
To add a wireless client to the network, use the settings found in the
back panel of the P-2812HNU(L)-Fx Series, such as the following
example:
1.
Right-click the wireless adapter icon which appears in the bottom
right of your computer monitor. Click
View Available Wireless
Networks
.
2.
Select the P-2812HNU(L)-Fx Series’
SSID
name and click
Connect
(
A
). The SSID “SecureWirelessNetwork” is given here as an
example.
SSID:
SecureWirelessNetwork
WPA2-PSK:
7WC3R7TVKWK3R
A
Page 9 / 12
9
3.
You are prompted to enter a password. Enter the encryption key
(WPA-PSK) found in the back panel of the P-2812HNU(L)-Fx Series
and click
Connect
.
4.
You may have to wait several minutes while your computer connects
to the wireless network.
5.
You should now be securely connected wirelessly to the P-
2812HNU(L)-Fx Series.
#
If you cannot connect wirelessly to the P-2812HNU(L)-Fx Series, check that
you have selected the correct
SSID
and entered the correct security key. If
that does not work, ensure that the
WLAN/WPS
LED on the front panel is
turned on.
Making Phone Calls
Follow these directions to make calls over the Internet.
1.
To dial a SIP number, press the numbers on your phone’s keypad to
make the call.
2.
To call regular telephone numbers, use your VoIP service provider’s
dialing plan.
Page 10 / 12
10
10
3.
For call forward service, contact your service provider to know if they
support this feature.
4.
To receive a call through the P-2812HNU(L)-Fx Series, the other
party must have your SIP number and a SIP account of their own.
The Web Configurator
The Web Configurator is a web browser tool that allows you to configure
the P-2812HNU(L)-Fx Series. The computer and the P-2812HNU(L)-Fx
Series need to be in the same IP address range to use this tool.
1.
Open your browser and enter
(the P-2812HNU(L)-
Fx Series' default IP address).
2.
For administrator login, enter the default username “admin” and
password “1234”.
3.
Click
Login
.
#
If the login screen does not open, make sure you allow web browser pop-up
windows, JavaScript and Java permissions. Your computer should also be
set to get an IP address automatically from a DHCP server. See your User’s
Guide for more information.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top