1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-2812HNU-F1 vT

Zyxel P-2812HNU-F1 vT Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Zyxel P-2812HNU-F1 vT router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 12
www.zyxel.com
Quick Start Guide
P-2812HNU(L)-Fx Series
802.11n Wireless VDSL2 VoIP
Combo WAN IAD
Firmware Version 3.10
Edition 1, 3/2011
DEFAULT LOGIN DETAILS
IP Address:
Username:
Admin account: admin
User account: user
Password:
Admin account: 1234
User account: 1234
2011 ZyXEL Communications Corporation
C
Page 2 / 12
2
Device Panels
POWER
DSL
INTERNET
PHONE1,2
WAN
WLAN/WPS
ETHERNET 1
‐
4
LED
LEDS
LEDS
USB1,2
Front
LED
LED
LED
LEDS
WLAN/WPS
BUTTON
LED
ON/OFF
RESET
POWER
ETHERNET
PORT 1
‐
4
PHONE
PORT 1,2
WAN
PORT
DSL
PORT
USB
PORT
USB
PORT
BUTTON
Back
BUTTON
FXO
PORT
(
P-2812HNUL-Fx only)
Page 3 / 12
3
Requirements
Make sure you have the following things before you start:
•
INTERNET ACCESS:
You need an Internet account with an ISP
(Internet Service Provider) and information such as your user name,
password, and so on.
•
VoIP ACCOUNT:
If you wish to make phone calls over the Internet,
you need the account information provided by your VoIP service
provider (the company that lets you make phone calls over the
Internet).
•
3G account:
if you want to access the Internet through a 3G
network. The P-2812HNU(L)-Fx Series uses this 3G connection as
your WAN or a backup when the DSL/Ethernet WAN connection
fails.
•
WEB BROWSER:
Internet Explorer 6.0 and later versions, with
JavaScript enabled, or Mozilla Firefox 3 and later versions, or Safari
2.0 and later versions. The browser will be used to access the
Internet and/or access the P-2812HNU(L)-Fx’s Web Configurator.
Page 4 / 12
4
Hardware Connections
1a
3
4
1b
3
2
4
6
5
7
RJ-11 port for
RJ-45 port for
P-2812HNU(L)-F1
P-2812HNU(L)-F3
Page 5 / 12
5
1.
Do one of the following for your Internet connection:
a. DSL
: For P-2812HNU(L)-F1, the port is RJ-11; for P-2812HNU(L)-
F3, the port is RJ-45. Use a telephone wire to connect this port to
a telephone jack (or the
DSL/MODEM
jack on a splitter, if you
have one).
b. WAN
: If you have a DSL router or modem already installed in your
network, use an Ethernet cable to connect this port to an
Ethernet jack in the modem with Internet access.
2.
FXO
(for “L” models only): You need a splitter to use the FXO port.
Use a PSTN line cable to connect the
TEL
(or
PHONE
) jack on a
splitter to this port.
3.
USB 2.0:
There are two USB ports on your P-2812HNU(L)-Fx Series,
one is at the back panel and one is at the side panel. You can do the
following:
a.
Use a USB cable (not provided) to connect a USB
device
(version 2.0 or lower) such as USB hard drive or printer for file or
printer sharing.
b.
Insert a 3G adapter to access the Internet wirelessly via a 3G
network. The P-2812HNU(L)-Fx Series uses this 3G WAN
connection as a backup when the DSL/Ethernet WAN connection
fails.
4.
ETHERNET:
If you want a wired connection to the P-2812HNU(L)-Fx
Series, use an Ethernet cable to connect a computer to one of these
ports for initial configuration and/or Internet access.
5.
PHONE
: To make calls over the Internet, use a telephone cable (and
any telephone adaptor provided with your P-2812HNU(L)-Fx Series)
to connect a telephone to the
PHONE 1
or
PHONE 2
port. If you only
have one telephone, you should use
PHONE 1
.

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top