1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-2602HW-D1A
    5. /
  5. 80
Page 396 / 427 Scroll up to view Page 391 - 395
P-2602H(W)(L)-DxA Series User’s Guide
396
Appendix K Internal SPTGEN
Some parameters are dependent on others. For example, if you disable the
Configured
field in
menu 1 (see
Figure 224 on page 395
), then you disable every field in this menu.
If you enter a parameter that is invalid in the
Input
column, the ZyXEL Device will not save
the configuration and the command line will display the
Field Identification Number
.
Figure
225 on page 396
, shown next, is an example of what the ZyXEL Device displays if you enter a
value other than “0” or “1” in the
Input
column of
Field Identification Number
1000000
(refer to
Figure 224 on page 395
).
Figure 225
Invalid Parameter Entered: Command Line Example
The ZyXEL Device will display the following if you enter parameter(s) that
are
valid.
Figure 226
Valid Parameter Entered: Command Line Example
Internal SPTGEN FTP Download Example
1
Launch your FTP application.
2
Enter "
bin
". The command “
bin
” sets the transfer mode to binary.
3
Get "
rom-t
" file. The command “
get
” transfers files from the ZyXEL Device to your
computer. The name “
rom-t
” is the configuration filename on the ZyXEL Device.
4
Edit the "
rom-t
" file using a text editor (do not use a word processor). You must leave
this FTP screen to edit.
field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
Page 397 / 427
P-2602H(W)(L)-DxA Series User’s Guide
Appendix K Internal SPTGEN
397
Figure 227
Internal SPTGEN FTP Download Example
Note:
You can rename your “
rom-t
” file when you save it to your computer but it must
be named “
rom-t
” when you upload it to your ZyXEL Device.
Internal SPTGEN FTP Upload Example
1
Launch your FTP application.
2
Enter "
bin
". The command “
bin
” sets the transfer mode to binary.
3
Upload your “
rom-t
” file from your computer to the ZyXEL Device using the “
put
”
command. computer to the ZyXEL Device.
4
Exit this FTP application.
Figure 228
Internal SPTGEN FTP Upload Example
Example Internal SPTGEN Screens
220 PPP FTP version 1.0 ready at Sat Jan 1 03:22:12 2000
User (192.168.1.1:(none)):
331 Enter PASS command
Password:
230 Logged in
ftp>bin
200 Type I OK
ftp> get rom-t
ftp>bye
c:\edit rom-t
(edit the rom-t text file by a text editor and save it)
220 PPP FTP version 1.0 ready at Sat Jan 1 03:22:12 2000
User (192.168.1.1:(none)):
331 Enter PASS command
Password:
230 Logged in
ftp>bin
200 Type I OK
ftp> put rom-t
ftp>bye
Page 398 / 427
P-2602H(W)(L)-DxA Series User’s Guide
398
Appendix K Internal SPTGEN
This section covers ZyXEL Device Internal SPTGEN screens.
The following are the Internal SPTGEN menus.
Table 173
Abbreviations Used in the Example Internal SPTGEN Screens Table
ABBREVIATION
MEANING
FIN
Field Identification Number
FN
Field Name
PVA
Parameter Values Allowed
INPUT
An example of what you may enter
*
Applies to the ZyXEL Device.
Table 174
Menu 1 General Setup
/ Menu 1 General Setup
FIN
FN
PVA
INPUT
10000000 =
Configured
<0(No) | 1(Yes)>
= 0
10000001 =
System Name
<Str>
= Your Device
10000002 =
Location
<Str>
=
10000003 =
Contact Person's Name
<Str>
=
10000004 =
Route IP
<0(No) | 1(Yes)>
= 1
10000006 =
Bridge
<0(No) | 1(Yes)>
= 0
Table 175
Menu 3
/ Menu 3.1 General Ethernet Setup
FIN
FN
PVA
INPUT
30100001 =
Input Protocol filters Set 1
= 2
30100002 =
Input Protocol filters Set 2
= 256
30100003 =
Input Protocol filters Set 3
= 256
30100004 =
Input Protocol filters Set 4
= 256
30100005 =
Input device filters Set 1
= 256
30100006 =
Input device filters Set 2
= 256
30100007 =
Input device filters Set 3
= 256
30100008 =
Input device filters Set 4
= 256
30100009 =
Output protocol filters Set 1
= 256
30100010 =
Output protocol filters Set 2
= 256
30100011 =
Output protocol filters Set 3
= 256
30100012 =
Output protocol filters Set 4
= 256
30100013 =
Output device filters Set 1
= 256
Page 399 / 427
P-2602H(W)(L)-DxA Series User’s Guide
Appendix K Internal SPTGEN
399
30100014 =
Output device filters Set 2
= 256
30100015 =
Output device filters Set 3
= 256
30100016 =
Output device filters Set 4
= 256
/ Menu 3.2 TCP/IP and DHCP Ethernet Setup
FIN
FN
PVA
INPUT
30200001 =
DHCP
<0(None) |
1(Server) |
2(Relay)>
= 0
30200002 =
Client IP Pool Starting Address
=
192.168.1.33
30200003 =
Size of Client IP Pool
= 32
30200004 =
Primary DNS Server
= 0.0.0.0
30200005 =
Secondary DNS Server
= 0.0.0.0
30200006 =
Remote DHCP Server
= 0.0.0.0
30200008 =
IP Address
=
172.21.2.200
30200009 =
IP Subnet Mask
= 16
30200010 =
RIP Direction
<0(None) |
1(Both) | 2(In
Only) | 3(Out
Only)>
= 0
30200011 =
Version
<0(Rip-1) |
1(Rip-2B)
|2(Rip-2M)>
= 0
30200012 =
Multicast
<0(IGMP-v2) |
1(IGMP-v1) |
2(None)>
= 2
30200013 =
IP Policies Set 1 (1~12)
= 256
30200014 =
IP Policies Set 2 (1~12)
= 256
30200015 =
IP Policies Set 3 (1~12)
= 256
30200016 =
IP Policies Set 4 (1~12)
= 256
/ Menu 3.2.1 IP Alias Setup
FIN
FN
PVA
INPUT
30201001 =
IP Alias 1
<0(No) |
1(Yes)>
= 0
30201002 =
IP Address
= 0.0.0.0
30201003 =
IP Subnet Mask
= 0
30201004 =
RIP Direction
<0(None) |
1(Both) | 2(In
Only) | 3(Out
Only)>
= 0
30201005 =
Version
<0(Rip-1) |
1(Rip-2B)
|2(Rip-2M)>
= 0
Table 175
Menu 3
Page 400 / 427
P-2602H(W)(L)-DxA Series User’s Guide
400
Appendix K Internal SPTGEN
30201006 =
IP Alias #1 Incoming protocol filters
Set 1
= 256
30201007 =
IP Alias #1 Incoming protocol filters
Set 2
= 256
30201008 =
IP Alias #1 Incoming protocol filters
Set 3
= 256
30201009 =
IP Alias #1 Incoming protocol filters
Set 4
= 256
30201010 =
IP Alias #1 Outgoing protocol filters
Set 1
= 256
30201011 =
IP Alias #1 Outgoing protocol filters
Set 2
= 256
30201012 =
IP Alias #1 Outgoing protocol filters
Set 3
= 256
30201013 =
IP Alias #1 Outgoing protocol filters
Set 4
= 256
30201014 =
IP Alias 2 <0(No) | 1(Yes)>
= 0
30201015 =
IP Address
= 0.0.0.0
30201016 =
IP Subnet Mask
= 0
30201017 =
RIP Direction
<0(None) |
1(Both) | 2(In
Only) | 3(Out
Only)>
= 0
30201018 =
Version
<0(Rip-1) |
1(Rip-2B)
|2(Rip-2M)>
= 0
30201019 =
IP Alias #2 Incoming protocol filters
Set 1
= 256
30201020 =
IP Alias #2 Incoming protocol filters
Set 2
= 256
30201021 =
IP Alias #2 Incoming protocol filters
Set 3
= 256
30201022 =
IP Alias #2 Incoming protocol filters
Set 4
= 256
30201023 =
IP Alias #2 Outgoing protocol filters
Set 1
= 256
30201024 =
IP Alias #2 Outgoing protocol filters
Set 2
= 256
30201025 =
IP Alias #2 Outgoing protocol filters
Set 3
= 256
30201026 =
IP Alias #2 Outgoing protocol filters
Set 4
= 256
*/ Menu 3.5 Wireless LAN Setup
FIN
FN
PVA
INPUT
30500001 =
ESSID
Wireless
Table 175
Menu 3

Rate

3.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top