1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. NBG5615
    5. /
  5. 32
Page 156 / 252 Scroll up to view Page 151 - 155
Chapter 21 Universal Plug-and-Play (UPnP)
NBG5715 User’s Guide
156
Figure 97
Internet Connection Properties: Advanced Settings: Add
Note: When the UPnP-enabled device is disconnected from your computer, all port
mappings will be deleted automatically.
5
Select
Show icon in notification area when connected
option and click
OK
. An icon displays in
the system tray.
Figure 98
System Tray Icon
6
Double-click on the icon to display your current Internet connection status.
Figure 99
Internet Connection Status
21.4.2
Web Configurator Easy Access
With UPnP, you can access the web-based configurator on the NBG5715 without finding out the IP
address of the NBG5715 first. This comes helpful if you do not know the IP address of the
NBG5715.
Follow the steps below to access the web configurator.
1
Click
Start
and then
Control Panel
.
Page 157 / 252
Chapter 21 Universal Plug-and-Play (UPnP)
NBG5715 User’s Guide
157
2
Double-click
Network Connections
.
3
Select
My Network Places
under
Other Places
.
Figure 100
Network Connections
4
An icon with the description for each UPnP-enabled device displays under
Local Network
.
5
Right-click on the icon for your NBG5715 and select
Invoke
. The web configurator login screen
displays.
Figure 101
Network Connections: My Network Places
6
Right-click on the icon for your NBG5715 and select
Properties
. A properties window displays with
basic information about the NBG5715.
Page 158 / 252
Chapter 21 Universal Plug-and-Play (UPnP)
NBG5715 User’s Guide
158
Figure 102
Network Connections: My Network Places: Properties: Example
Page 159 / 252
NBG5715 User’s Guide
159
C
HAPTER
22
Maintenance
22.1
Overview
This chapter provides information on the
Maintenance
screens.
22.2
What You Can Do in this Chapter
•
Use the
General
screen to set the timeout period of the management session (
Section 22.3 on
page 159
).
•
Use the
Password
screen to change your NBG5715’s system password (
Section 22.4 on page
160
).
•
Use the
Time
screen to change your NBG5715’s time and date (
Section 22.5 on page 161
).
•
Use the
Firmware Upgrade
screen to upload firmware to your NBG5715 (
Section 22.6 on page
162
).
•
Use the
Backup/Restore
screen to view information related to factory defaults, backup
configuration, and restoring configuration (
Section 22.7 on page 163
).
•
Use the
Language
screen to change the language for the Web Configurator (
Section 22.8 on
page 165
) .
22.3
General Screen
Use this screen to set the management session timeout period. Click
Maintenance
>
General
.
The following screen displays.
Figure 103
Maintenance > General
Page 160 / 252
Chapter 22 Maintenance
NBG5715 User’s Guide
160
The following table describes the labels in this screen.
22.4
Password Screen
It is strongly recommended that you change your NBG5715's password.
If you forget your NBG5715's password (or IP address), you will need to reset the device. See
Section 22.7 on page 163
for details.
Click
Maintenance
>
Password
. The screen appears as shown.
Figure 104
Maintenance > Password
The following table describes the labels in this screen.
Table 69
Maintenance > General
LABEL
DESCRIPTION
System Name
System Name is a unique name to identify the NBG5715 in an Ethernet
network.
Domain Name
Enter the domain name you want to give to the NBG5715.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the
session times out. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle
(not recommended).
Apply
Click
Apply
to save your changes back to the NBG5715.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 70
Maintenance > Password
LABEL
DESCRIPTION
Password Setup
Change your NBG5715’s password (recommended) using the fields as shown.
Old Password
Type the default password or the existing password you use to access the
system in this field.
New Password
Type your new system password (up to 30 characters). Note that as you type
a password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click
Apply
to save your changes back to the NBG5715.
Cancel
Click
Cancel
to begin configuring this screen afresh.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top