1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. NBG-418N
    5. /
  5. 26
Page 126 / 224 Scroll up to view Page 121 - 125
Chapter 15 System
NBG-418N User’s Guide
126
The following table describes the labels in this screen.
15.4
Time Setting Screen
To change your NBG-418N’s time and date, click
Maintenance
>
System
>
Time Setting
. The
screen appears as shown. Use this screen to configure the NBG-418N’s time based on your local
time zone.
Table 53
Maintenance > System > General
LABEL
DESCRIPTION
System Setup
System Name
System Name is a unique name to identify the NBG-418N in an Ethernet network. It is
recommended you enter your computer’s “Computer name” in this field (see
the
chapter
about wizard setup for how to find your computer’s name).
This name can be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes “-” and underscores "_" are accepted.
Domain Name
Enter the domain name (if you know it) here. If you leave this field blank, the ISP may
assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain name.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Password Setup
Change your NBG-418N’s password (recommended) using the fields as shown.
Old Password
Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click
Apply
to save your changes back to the NBG-418N.
Reset
Click
Reset
to begin configuring this screen afresh.
Page 127 / 224
Chapter 15 System
NBG-418N User’s Guide
127
Figure 92
Maintenance > System > Time Setting
The following table describes the labels in this screen.
Table 54
Maintenance > System > Time Setting
LABEL
DESCRIPTION
Current Time and Date
Current Time
This field displays the time of your NBG-418N.
Each time you reload this page, the NBG-418N synchronizes the time with the time
server.
Current Date
This field displays the date of your NBG-418N.
Each time you reload this page, the NBG-418N synchronizes the date with the time
server.
Time and Date Setup
Manual
Select this radio button to enter the time and date manually. If you configure a new
time and date, Time Zone and Daylight Saving at the same time, the new time and date
you entered has priority and the Time Zone and Daylight Saving settings do not affect
it.
Copy Your
Computer’s Time
Settings
Click this to copy the time settings of your computer into the NBG-418N’s time and date
setup.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time
configured manually.
When you set
Time and Date Setup
to
Manual
, enter the new time in this field and
then click
Apply
.
Page 128 / 224
Chapter 15 System
NBG-418N User’s Guide
128
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you set
Time and Date Setup
to
Manual
, enter the new date in this field and
then click
Apply
.
Get from Time
Server
Select this radio button to have the NBG-418N get the time and date from the time
server you specified below.
Auto
Select
Auto
to have the NBG-418N automatically search for an available time server
and synchronize the date and time with the time server after you click
Apply
.
User Defined Time
Server Address
Select
User Defined Time Server Address
and enter the IP address or URL (up to 20
extended ASCII characters in length) of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Time Zone Setup
Time Zone
Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Savings
Daylight saving is a period from late spring to early fall when many countries set their
clocks ahead of normal local time by one hour to give more daytime light in the
evening.
Select this option if you use Daylight Saving Time.
Start Date
Configure the day and time when Daylight Saving Time starts if you selected
Daylight
Savings
. The
o'clock
field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the first Sunday of
April. Each time zone in the United States starts using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select
First
,
Sunday
,
April
and type 2 in
the
o'clock
field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of
the time zones in the European Union start using Daylight Saving Time at the same
moment (1 A.M. GMT or UTC). So in the European Union you would select
Last
,
Sunday
,
March
. The time you type in the
o'clock
field depends on your time zone. In
Germany for instance, you would type 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
End Date
Configure the day and time when Daylight Saving Time ends if you selected
Daylight
Savings
. The
o'clock
field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October. Each
time zone in the United States stops using Daylight Saving Time at 2 A.M. local time.
So in the United States you would select
Last
,
Sunday
,
October
and type 2 in the
o'clock
field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of
the time zones in the European Union stop using Daylight Saving Time at the same
moment (1 A.M. GMT or UTC). So in the European Union you would select
Last
,
Sunday
,
October
. The time you type in the
o'clock
field depends on your time zone.
In Germany for instance, you would type 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
Apply
Click
Apply
to save your changes back to the NBG-418N.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 54
Maintenance > System > Time Setting (continued)
LABEL
DESCRIPTION
Page 129 / 224
NBG-418N User’s Guide
129
C
HAPTER
16
Logs
16.1
Overview
This chapter contains information about configuring general log settings and viewing the NBG-
418N’s logs.
The Web Configurator allows you to look at all of the NBG-418N’s logs in one location.
16.2
What You Need to Know
An alert is a type of log that warrants more serious attention. They include system errors, attacks
(access control) and attempted access to blocked web sites or web sites with restricted web
features such as cookies, active X and so on. Some categories such as
System Errors
consist of
both logs and alerts. You may differentiate them by their color in the
View Log
screen. Alerts
display in red and logs display in black.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full (see
Log Schedule
). Selecting many alert and/or log categories (especially
Access Control
) may
result in many e-mails being sent.
16.3
View Log Screen
Use the
View Log
screen to see the logged messages for the NBG-418N. Options include logs
about system maintenance, system errors, access control, allowed or blocked web sites, blocked
web features (such as ActiveX controls, Java and cookies), attacks (such as DoS) and IPSec.
Log entries in red indicate system error logs. The log wraps around and deletes the old entries after
it fills. Click a column heading to sort the entries. A triangle indicates ascending or descending sort
order.
Click
Maintenance
>
Logs
to open the
View Log
screen.
Page 130 / 224
Chapter 16 Logs
NBG-418N User’s Guide
130
Figure 93
Maintenance > Logs > View Log
The following table describes the labels in this screen.
Table 55
Maintenance > Logs > View Log
LABEL
DESCRIPTION
Refresh
Click
Refresh
to renew the log screen.
Clear Logs
Click
Clear Logs
to delete all the logs.
Next
Click
Next
to show the next page of log entries.
Last
Click
Last
to show the last page of log entries.
#
This is the index number of the log entry.
Time
This field displays the time the log was recorded. See the chapter on system
maintenance and information to configure the NBG-418N’s time and date.
Message
This field states the reason for the log.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top