Page 186 / 296
Scroll up to view Page 181 - 185
Chapter 18 Universal Plug-and-Play (UPnP)
NBG334W User’s Guide
186
Page 189 / 296
NBG334W User’s Guide
189
C
HAPTER
19
System
This chapter provides information on the
System
screens.
19.1
System Overview
See the chapter about wizard setup for more information on the next few screens.
19.2
System General Screen
Click
Maintenance
>
System
. The following screen displays.
Figure 112
Maintenance > System > General
The following table describes the labels in this screen.
Table 74
Maintenance > System > General
LABEL
DESCRIPTION
System Name
System Name is a unique name to identify the NBG334W in an Ethernet
network. It is recommended you enter your computer’s “Computer name” in this
field (see
the
chapter about wizard setup for how to find your computer’s name).
This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes “-” and underscores "_" are accepted.
Domain Name
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Page 190 / 296
Chapter 19 System
NBG334W User’s Guide
190
19.3
Time Setting Screen
To change your NBG334W’s time and date, click
Maintenance
>
System
>
Time Setting
.
The screen appears as shown. Use this screen to configure the NBG334W’s time based on
your local time zone.
Figure 113
Maintenance > System > Time Setting
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long it
has been left idle (not recommended).
Password Setup
Change your NBG334W’s password (recommended) using the fields as shown.
Old Password
Type the default password or the existing password you use to access the
system in this field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click
Apply
to save your changes back to the NBG334W.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 74
Maintenance > System > General
LABEL
DESCRIPTION
19216811.live