Zyxel F1000 Router Manual PDF (Setup & Configuration Guide)

Page 176 / 359 Scroll up to view Page 171 - 175

Chapter 11 Interface Group

eircom F1000 Modem User’s Guide

176

In the following example, the client that sends packets with the DHCP Vendor ID option set to MSFT

5.0 (meaning it is a Windows 2000 DHCP client) is assigned the IP address 192.168.2.2 and uses

the WAN VDSL_PoE/ppp0.1 interface.

Figure 100

Interface Grouping Application

Click

Network Setting > Interface Group

to open the following screen.

Figure 101

Network Setting > Interface Group

The following table describes the fields in this screen.

11.2.1

Interface Group Configuration

Click the

Add New Interface Group

button in the

Interface Group

screen to open the following

screen. Use this screen to create a new interface group.

Table 70

Network Setting > Interface Group

LABEL

DESCRIPTION

Add New

Interface Group

Click this button to create a new interface group.

Group Name

This shows the descriptive name of the group.

WAN Interface

This shows the WAN interfaces in the group.

LAN Interfaces

This shows the LAN interfaces in the group.

Criteria

This shows the filtering criteria for the group.

Modify

Click the

Delete

icon to remove the group.

Add

Click this button to create a new group.

Default: ETH 2~4

Internet

192.168.1.x/24

192.168.2.x/24

VDSL_PoE/ppp0.1

eth10.0

DHCP Vendor ID option: MSFT 5.0

Page 177 / 359

Chapter 11 Interface Group

eircom F1000 Modem User’s Guide

177

Note: An interface can belong to only one group at a time.

Figure 102

Interface Group Configuration

The following table describes the fields in this screen.

Table 71

Interface Group Configuration

LABEL

DESCRIPTION

Group Name

Enter a name to identify this group. You can enter up to 30 characters. You can use letters,

numbers, hyphens (-) and underscores (_). Spaces are not allowed.

WAN Interface

used in the

grouping

Select the WAN interface this group uses. The group can have up to one PTM interface, up to

one ATM interface and up to one ETH interface.

Select

None

to not add a WAN interface to this group.

Grouped LAN

Interfaces

Available LAN

Interfaces

Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the

Available

LAN Interfaces

list and use the left arrow to move them to the

Grouped LAN Interfaces

list to add the interfaces to this group.

To remove a LAN or wireless LAN interface from the

Grouped LAN Interfaces

, use the

right-facing arrow.

Automatically

Add Clients

With the

following DHCP

Vendor IDs

Click

Add

to identify LAN hosts to add to the interface group by criteria such as the type of

the hardware or firmware. See

Section 11.2.2 on page 178

for more information.

#

This shows the index number of the rule.

Filter Criteria

This shows the filtering criteria. The LAN interface on which the matched traffic is received

will belong to this group automatically.

WildCard

Support

This shows if wildcard on DHCP option 60 is enabled.

Remove

Click the

Remove

icon to delete this rule from the Device.

Page 178 / 359

Chapter 11 Interface Group

eircom F1000 Modem User’s Guide

178

11.2.2

Interface Grouping Criteria

Click the

Add

button in the

Interface Grouping Configuration

screen to open the following

screen.

Figure 103

Interface Grouping Criteria

The following table describes the fields in this screen.

Apply

Click

Apply

to save your changes back to the Device.

Cancel

Click

Cancel

to exit this screen without saving.

Table 71

Interface Group Configuration (continued)

LABEL

DESCRIPTION

Table 72

Interface Grouping Criteria

LABEL

DESCRIPTION

Source MAC

Address

Enter the source MAC address of the packet.

DHCP Option

60

Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,

such as the type of the hardware or firmware.

Enable

wildcard on

DHCP

option 60

option

Select this option to be able to use wildcards in the Vendor Class Identifier configured for

DHCP option 60.

DHCP Option

61

Select this and enter the device identity of the matched traffic.

IAID

Enter the Identity Association Identifier (IAID) of the device, for example, the WAN

connection index number.

Page 179 / 359

Chapter 11 Interface Group

eircom F1000 Modem User’s Guide

179

DUID type

Select

DUID-LLT

(DUID Based on Link-layer Address Plus Time) to enter the hardware

type, a time value and the MAC address of the device.

Select

DUID-EN

(DUID Assigned by Vendor Based upon Enterprise Number) to enter the

vendor’s registered enterprise number.

Select

DUID-LL

(DUID Based on Link-layer Address) to enter the device’s hardware type

and hardware address (MAC address) in the following fields.

Select

Other

to enter any string that identifies the device in the DUID field.

DHCP Option

125

Select this and enter vendor specific information of the matched traffic.

Enterprise

Number

Enter the vendor’s 32-bit enterprise number registered with the IANA (Internet Assigned

Numbers Authority).

Manufactur

er OUI

Specify the vendor’s OUI (Organization Unique Identifier). It is usually the first three bytes

of the MAC address.

Product

Class

Enter the product class of the device.

Model

Name

Enter the model name of the device.

Serial

Number

Enter the serial number of the device.

Apply

Click

Apply

to save your changes back to the Device.

Cancel

Click

Cancel

to exit this screen without saving.

Table 72

Interface Grouping Criteria (continued)

LABEL

DESCRIPTION

Page 180 / 359

Chapter 11 Interface Group

eircom F1000 Modem User’s Guide

180

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share