19216811.liveChapter 6 Home Networking
eircom F1000 Modem User’s Guide
111
Use the following screen to configure the UPnP settings on your Device. Click
Network Setting >
Home Networking
> UPnP
to display the screen shown next.
Figure 58
Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
6.5
Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
Table 31
Network Setting > Home Networking > UPnP
LABEL
DESCRIPTION
UPnP
Select
Enable
to activate UPnP. Be aware that anyone could use a UPnP application to open
the web configurator's login screen without entering the Device's IP address (although you
must still enter the password to access the web configurator).
UPnP NAT-T
Select
Enable
to allow UPnP-enabled applications to automatically configure the Device so
that they can communicate through the Device by using NAT traversal. UPnP applications
automatically reserve a NAT forwarding port in order to communicate with another UPnP
enabled device; this eliminates the need to manually configure port forwarding for the UPnP
enabled application.
The table below displays the NAT port forwarding rules added automatically by UPnP NAT-T.
#
This is the index number of the UPnP NAT-T connection.
Description
This is the description of the UPnP NAT-T connection.
IP Address
This is the IP address of the other connected UPnP enabled device.
External Port
This is the external port number that identifies the service.
Internal Port
This is the internal port number that identifies the service.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.