Chapter 19 Traffic Status

AMG1302/AMG1202-TSeries User’s Guide

206

AMG1302/AMG1202-TSeries User’s Guide

207

C

HAPTER

20

User Account

20.1

Overview

You can configure system password for different user accounts in the

User Account

screen.

20.2

The User Account Screen

Use the

User Account

screen to configure system password.

Click

Maintenance > User Account

to open the following screen.

Figure 103

Maintenance > User Account

The following table describes the labels in this screen.

Table 79

Maintenance > User Account

LABEL

DESCRIPTION

User Name

You can configure the password for the

Power User

and

Admin

accounts.

Old Password

Type the default password or the existing password you use to access the system in this

field.

New Password

Type your new system password (up to 30 characters). Note that as you type a password,

the screen displays a (*) for each character you type. After you change the password, use

the new password to access the AMG1302/AMG1202-TSeries.

Retype to

Confirm

Type the new password again for confirmation.

Apply

Click

Apply

to save your changes.

Cancel

Click

Cancel

to restore your previously saved settings.

Chapter 20 User Account

AMG1302/AMG1202-TSeries User’s Guide

208

AMG1302/AMG1202-TSeries User’s Guide

209

C

HAPTER

21

TR-069 Client

21.1

Overview

The AMG1302/AMG1202-TSeries supports TR-069 Amendment 1 (CPE WAN Management Protocol

Release 2.0) and TR-069 Amendment 2 (CPE WAN Management Protocol v1.1, Release 3.0).

TR-069 is a protocol that defines how your AMG1302/AMG1202-TSeries (

ZD

) can be managed via a

management server (

MS

) such as ZyXEL’s Vantage Access.

Figure 104

LAN and WAN

An administrator can use a management server to remotely set up the AMG1302/AMG1202-

TSeries, modify settings, perform firmware upgrades as well as monitor and diagnose the

AMG1302/AMG1202-TSeries.

In order to use CWMP, you need to configure the following steps:

1

Activate CWMP

2

Specify the URL, username and password.

3

Activate periodic inform and specify an interval value.

21.2

The TR-069 Client Screen

Use this screen to configure your AMG1302/AMG1202-TSeries to be managed by a management

server. Click

Maintenance

>

TR-069 Client

to display the following screen.

MS

ZD

Chapter 21 TR-069 Client

AMG1302/AMG1202-TSeries User’s Guide

210

Figure 105

Maintenance > TR-069 Client

The following table describes the fields in this screen.

Table 80

Maintenance > TR-069 Client

LINK

DESCRIPTION

CWMP

Select

Enable

to allow the AMG1302/AMG1202-TSeries to be managed by a management

server or select

Disable

to not allow the AMG1302/AMG1202-TSeries to be managed by a

management server.

ACS URL

Type the IP address or domain name of the management server. If the AMG1302/AMG1202-

TSeries is behind a NAT router that assigns it a private IP address, you will have to

configure a NAT port forwarding rule on the NAT router.

ACS User Name

The user name is used to authenticate the AMG1302/AMG1202-TSeries when making a

connection to the management server. This user name on the management server and the

AMG1302/AMG1202-TSeries must be the same. Type a user name of up to 255 printable

characters found on an English-language keyboard. Spaces and characters such as

@#$%^&*()_+ are allowed.

ACS Password

The password is used to authenticate the AMG1302/AMG1202-TSeries when making a

connection to the management server. This password on the management server and the

AMG1302/AMG1202-TSeries must be the same. Type a password of up to 255 printable

characters found on an English-language keyboard.

Connection

Request Path

Type the IP address or domain name of the AMG1302/AMG1202-TSeries. The management

server uses this path to verify the AMG1302/AMG1202-TSeries.

Connection

Request Port

The default port for access to the AMG1302/AMG1202-TSeries from the management server

is port 7547. If you change it, make sure it does not conflict with another port on your

network and it is recommended to use a port number above 1024 (not a commonly used

port). The management server should use this port to connect to the AMG1302/AMG1202-

TSeries. You may need to alter your NAT port forwarding rules if they were already

configured.

Connection

Request

UserName

The user name is used to authenticate the management server when connecting to the

AMG1302/AMG1202-TSeries. Type a user name of up to 255 printable characters found on

an English-language keyboard. Spaces and characters such as @#$%^&*()_+ are allowed.

Connection

Request

Password

The password is used to authenticate the management server when connecting to the

AMG1302/AMG1202-TSeries. Type a password of up to 255 printable characters found on an

English-language keyboard. Spaces are not allowed.

Inform

Select

Enable

to have the AMG1302/AMG1202-TSeries periodically send information to the

management server (recommended if CWMP is enabled) or select

Disable

to not have the

AMG1302/AMG1202-TSeries periodically send information to the management server

Inform Interval

The interval is the duration in seconds for which the AMG1302/AMG1202-TSeries must

attempt to connect with the management server to send information and check for

configuration updates. Enter a value between 1 and 86400 seconds.