Zyxel AMG1302-T10B Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Zyxel

AMG1302-T10B

Page 81 / 320 Scroll up to view Page 76 - 80

Chapter 6 Broadband

AMG1302/AMG1202-TSeries User’s Guide

6.3

The More Connections Screen

The AMG1302/AMG1202-TSeries allows you to configure more than one Internet access connection.

To configure additional Internet access connections click

Network Setting > Broadband > More

Connections

. The screen differs by the encapsulation you select. When you use the

Broadband >

Internet Connection

screen to set up Internet access, you are configuring the first WAN

connection.

Figure 22

Network Setting > Broadband > More Connections

The following table describes the labels in this screen.

Table 13

Network Setting > Broadband > More Connections

LABEL

DESCRIPTION

ADSL Connections Table

This is an index number indicating the number of the corresponding connection.

Active

This field indicates whether the connection is active or not.

Clear the check box to disable the connection. Select the check box to enable it.

Node Name

This is the name you gave to the Internet connection.

VPI/VCI

This field displays the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)

numbers configured for this WAN connection.

Encapsulation

This field indicates the encapsulation method of the Internet connection.

Modify

The first (ISP) connection is read-only in this screen. Use the

Broadband > Internet

Connection

screen to edit it.

Click the

Edit

icon to edit the Internet connection settings. Click this icon on an empty

configuration to add a new Internet access setup.

Click the

Remove

icon to delete the Internet access setup from your connection list.

Ethernet Connections Table

Page 82 / 320

Chapter 6 Broadband

AMG1302/AMG1202-TSeries User’s Guide

6.3.1

More Connections Edit

Use this screen to configure a connection. Click the edit icon in the

More Connections

screen to

display the following screen.

This is an index number indicating the number of the corresponding connection.

Active

This field indicates whether the connection is active or not.

Clear the check box to disable the connection. Select the check box to enable it.

Node Name

This is the name you gave to the Internet connection.

VID

This field displays the VLAN ID number used by this connection.

Encapsulation

This field indicates the encapsulation method of the Internet connection.

Modify

The first (ISP) connection is read-only in this screen. Use the

Broadband > Internet

Connection

screen to edit it.

Click the

Edit

icon to edit the Internet connection settings. Click this icon on an empty

configuration to add a new Internet access setup.

Click the

Remove

icon to delete the Internet access setup from your connection list.

Table 13

Network Setting > Broadband > More Connections (continued)

LABEL

DESCRIPTION

Page 83 / 320

Chapter 6 Broadband

AMG1302/AMG1202-TSeries User’s Guide

Figure 23

Network Setting > Broadband > More Connections: Edit

The following table describes the labels in this screen.

Table 14

Network Setting > Broadband > More Connections: Edit

LABEL

DESCRIPTION

General

Active

Select the check box to activate or clear the check box to deactivate this connection.

Page 84 / 320

Chapter 6 Broadband

AMG1302/AMG1202-TSeries User’s Guide

Node Name

Enter a unique, descriptive name of up to 13 ASCII characters for this connection.

Mode

Select

Router

from the drop-down list box if your ISP allows multiple computers to share

an Internet account.

If you select

Bridge

, the AMG1302/AMG1202-TSeries will forward any packet that it does

not route to this remote node; otherwise, the packets are discarded.

Encapsulation

Select the method of encapsulation used by your ISP from the drop-down list box.

Choices vary depending on the mode you select in the

Mode

field.

If you select

Router

in the

Mode

field, select

PPPoA

RFC 1483

ENET ENCAP

PPPoE

If you select

Bridge

in the

Mode

field, method of encapsulation is not available.

Multiplex

Select the method of multiplexing used by your ISP from the drop-down list. Choices are

LLC

By prior agreement, a protocol is assigned a specific virtual circuit, for example, VC1 will

carry IP. If you select VC, specify separate VPI and VCI numbers for each protocol.

For LLC-based multiplexing or PPP encapsulation, one VC carries multiple protocols with

protocol identifying information being contained in each packet header. In this case, only

one set of VPI and VCI numbers need be specified for all protocols.

IPv6/IPv4 Dual

Stack

If you select

Enable

, the AMG1302/AMG1202-TSeries can connect to IPv4 and IPv6

networks and choose the protocol for applications according to the address type. If you

select

Disable,

the AMG1302/AMG1202-TSeries will operate in IPv4 mode.

VPI

The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.

VCI

The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for local management of

ATM traffic). Enter the VCI assigned to you.

IP Address

This option is available if you select

Router

in the

Mode

field.

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;

the ISP assigns you a different one each time you connect to the Internet.

If you use the encapsulation type except

RFC 1483

, select

Obtain an IP Address

Automatically

when you have a dynamic IP address; otherwise select

Static IP

Address

and type your ISP assigned IP address in the

IP Address

field below.

If you use

RFC 1483

, enter the IP address given by your ISP in the

IP Address

field.

Subnet Mask

Enter a subnet mask in dotted decimal notation.

Gateway IP

Address

Specify a gateway IP address (supplied by your ISP).

Primary DNS

Enter the primary DNS server’s address for the AMG1302/AMG1202-TSeries.

Secondary

DNS

Enter the secondary DNS server’s address for the AMG1302/AMG1202-TSeries.

NAT

SUA Only

is available only when you select

Router

in the

Mode

field.

Select

SUA Only

if you have one public IP address and want to use NAT. Otherwise, select

None

to disable NAT.

Apply

Click this to save your changes.

Cancel

Click this to return to the previous screen without saving.

Advanced Setup

Click this to display more fields in this screen to configure more details of your WAN

settings.

Table 14

Network Setting > Broadband > More Connections: Edit (continued)

LABEL

DESCRIPTION

Page 85 / 320

Chapter 6 Broadband

AMG1302/AMG1202-TSeries User’s Guide

6.3.2

Configuring More Connections Advanced Setup

Use this screen to edit your AMG1302/AMG1202-TSeries's advanced WAN settings. Click the

Advanced Setup

arrow icon in the

More Connections Edit

screen. The screen appears as shown.

Figure 24

Network Setting > Broadband > More Connections: Edit: Advanced Setup

The following table describes the labels in this screen.

Table 15

Network Setting > Broadband > More Connections: Edit: Advanced Setup

LABEL

DESCRIPTION

RIP & Multicast Setup

RIP Direction

Select the

RIP Direction

from

None

Both

In Only

and

Out Only

RIP Version

This field is not configurable if you select

None

in the

RIP Direction

field.

Select the

RIP Version

from

RIP-1

RIP2-B

and

RIP2-M

Multicast

Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish

membership in a multicast group. The AMG1302/AMG1202-TSeries supports

IGMP-v1

IGMP-v2

and

IGMP-v3

. Select

None

to disable it.

ATM QoS

ATM QoS Type

Select

CBR

(Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice or data

traffic. Select

UBR

(Unspecified Bit Rate) for applications that are non-time sensitive, such

as e-mail. Select

nrtVBR

(Variable Bit Rate-non Real Time) or

rtVBR

(Variable Bit Rate-

Real Time) for bursty traffic and bandwidth sharing with other applications.

Peak Cell Rate

Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find the Peak Cell Rate

(PCR). This is the maximum rate at which the sender can send cells. Type the PCR here.

Sustain Cell

Rate

The Sustain Cell Rate (SCR) sets the average cell rate (long-term) that can be transmitted.

Type the SCR, which must be less than the PCR. Note that system default is 0 cells/sec.

Maximum Burst

Size

Maximum Burst Size (MBS) refers to the maximum number of cells that can be sent at the

peak rate. Type the MBS, which is less than 65535.

MTU

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share