Page 41 / 89
Scroll up to view Page 36 - 40
C h a p t e r
5
Advanced Setup
The
Advanced Setup
configuration page determines how data enters and
exits the W300 router.
Firewall Configuration
By default the
Advanced Setup
page displays the
Firewall
configuration
page as shown in Figure 7. Enable or disable the firewall and SPI according
to requirements.
F
I G U R E
16 T
H E
F
I R E W A L L
C
O N F IG U R A T I O N
P
A G E
Proprietary Information of ZTE CORPORATION
30
Page 42 / 89
Chapter 2 - Product Installation
Routing Configuration
Routing directs the W300 router to forward data to specific IP address.
Figure 17 shows the routing configuration page. It shows the routing rules
which have been set.
F
I G U R E
17 T
H E
R
O U T I N G
C
O N F I G U R A T I O N
P
A GE
To add a route, click the
Add Route
button and Figure 18 displays. Set the
parameters according to Table 18.
F
I G U R E
18 A
D D I N G
R
O U T E
Click
SAVE
to save the changes; click
DELETE
to delete the parameters;
click
BACK
to return to the previous screen or
CANCEL
to exit without
saving.
Proprietary Information of ZTE CORPORATION
31
Page 43 / 89
ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
T
A B L E
18 T
H E
S
T A T I C
R
O U T E
P
A R A M E T E R S
Parameter
Description
Destination IP
Address
Enter the destination IP address for this routing rule
IP Subnet Mask
Enter the destination IP subnet mask for this routing rule
Gateway
IP
address
Enter the gateway IP address for this routing rule or select which
PVC will be affected by this routing rule.
Metric
Enter the metric for this routing rule.
Announced
in
RIP
Choose whether this route is included in RIP broadcasts.
NAT Configuration
Network Address Translation (NAT) translates the host IP address in a
packet used within on network to a different IP address known within
another network. The NAT configuration page is shown in Figure 19
.
F
I G U R E
19 T
H E
NAT C
O N F IG U R A T I O N
P
A G E
Select a virtual circuit (PV0 ~ PV7) and the related NAT status is displayed.
32
Proprietary Information of ZTE CORPORATION
Page 44 / 89
Chapter 2 - Product Installation
QoS Configuration
Quality of Service (Qos) helps to prioritize the data entering the W300
router. By attaching special identification marks or headers to incoming
packets, Qos determines which queue the packets enter, based on priority.
Figure 20 shows the Qos configuration page.
F
I G U R E
20 T
H E
Q
OS
C O N F I G U R A T I O N
P
A GE
The main goal of Qos is prioritizing incoming data, preventing data loss due
to factors such as jitter, delay and dropping. Another important aspect of
Qos is ensuring that prioritizing one data flow doesn’t interfere with other
data flows. Qos can be toggled
Activated
or
Deactivated
. Activate Qos to
edit the parameters listed in Figure 20. Click the
SAVE
button to submit the
changes.
Proprietary Information of ZTE CORPORATION
33
Page 45 / 89
ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
VLAN Configuration
A virtual LAN (VLAN) is a switched network logically segmented by functions,
project teams, or applications. The physical location of VLAN members is
unimportant. VLANs allow ports on the same or different switches to be
grouped so that traffic is confined to members of only that group. In high-
traffic networks, VLAN can reduce the amount of data sent to unnecessary
destinations.
VLAN must be activated before the use can assign VLAN PVID and define
VLAN group.
F
I G U R E
21 T
H E
VLAN C
O N F I G U R A T I O N
P
A GE
Click the link
Assign VLAN PVID for each interface
to display Figure 22.
Table 19 describes the parameters.
34
Proprietary Information of ZTE CORPORATION
19216811.live