Page 181 / 198
Scroll up to view Page 176 - 180
Chapter 20 Management Configuration
F
IGURE
180 R
ESTORE
D
EFAULT
C
ONFIG
Click
Restore
to restore the settings of the 931WII to factory de-
faults.
System Log
1.
Select
Management > System Log
to display the interface
as shown in
F
i
g
u
r
e
1
8
1
.
F
IGURE
181 S
YSTEM
L
OG
2.
Click
Configure
to display the interface as shown in
F
i
g
u
r
e
1
8
2
.
Confidential and Proprietary Information of ZTE CORPORATION
175
Page 182 / 198
ZXDSL 931WII Operation manual
F
IGURE
182 E
NABLING
S
YSTEM
L
OG
3.
Select
Enable
to enable the system log.
4.
Select the proper parameters in
Log Level
and
Display Level
drop-down menu. The Default log level is
Debugging
and the
default display level is
Error
.
5.
The mode options are
Local
,
Remote
, and
Both
. The default
is
Local
.
6.
If you select
Remote
or
Both
, all events are transmitted to
the specified UDP port of the specified log server, as shown in
F
i
g
u
r
e
1
8
3
.
F
IGURE
183 L
OG
S
ERVER
C
ONFIG
7.
Click
Save/Apply
to
save
the
configuration
so
that
the
changes can take effect.
8.
Click
View
to display the system log as shown in
F
i
g
u
r
e
1
8
4
.
176
Confidential and Proprietary Information of ZTE CORPORATION
Page 183 / 198
Chapter 20 Management Configuration
F
IGURE
184 S
YSTEM
E
VENT
L
OGS
SNMP Agent
Select
Management > SNMP Agent
to display the interface as
shown in
F
i
g
u
r
e
1
8
5
.
F
IGURE
185 SNMP A
GENT
This page allows you to configure modem to be a
SNMP
agent, so
that the modem can be managed by NMS as a network element.
You can enable or disable the SNMP agent function.
T
a
b
l
e
4
6
is a description of the different options.
Confidential and Proprietary Information of ZTE CORPORATION
177
Page 184 / 198
ZXDSL 931WII Operation manual
T
ABLE
46 SNMP A
GENT
C
ONFIGURATION
O
PTIONS
Field
Description
Read Community
Define the SNMP read community
name.
Set Community
Define the SNMP set community
name.
System Name
Define system name used in NMS.
System Location
Fill in system location.
System Contact
Fill in Contact information to con-
tact the maintenance personnel if
the system fails.
Trap Manager IP
Define NMS server IP address to
receive system SNMP trap reports.
Click
Save/Apply
to save the configuration so that the changes
can take effect.
Note:
You must restart SNMP agent by first disabling and then enabling
it for the configuration of Read/Set Community to take effect.
TR-069 Client Management
Protocol Components
TR-069 is one of the
CPE WAN
Management Protocol. It comprises
several components that are unique to this protocol, and makes
use of several standard protocols. The protocol stack defined by
the CPE WAN Management Protocol is shown in
F
i
g
u
r
e
1
8
6
.
178
Confidential and Proprietary Information of ZTE CORPORATION
Page 185 / 198
Chapter 20 Management Configuration
F
IGURE
186 P
ROTOCOL
S
TACK
A brief description of each layer is provided in
T
a
b
l
e
4
7
.
T
ABLE
47 P
ROTOCOL
L
AYER
S
UMMARY
Layer
Description
CPE/ACS Application
The application uses the CPE WAN
Management Protocol on the CPE
and ACS, respectively.
The appli-
cation is locally defined and not
specified as part of the CPE WAN
Management Protocol.
RPC Methods
The specific RPC methods that are
defined by the CPE WAN Manage-
ment Protocol.
SOAP
A
standard
XML-based
syntax
used here to encode remote pro-
cedure
calls.
Specifically
SOAP
1.1.
HTTP
HTTP 1.1.
SSL/TLS
The
standard
Internet
transport
layer security protocols.
Specifi-
cally, SSL 3.0 or TLS 1.0.
Use of
SSL/TLS
is
recommended
but
is
not required.
TCP/IP
Standard TCP/IP.
Protocol Application
The
CPE WAN
Management Protocol is proposed as the protocol
to be used on the ACS Southbound Interface between an Auto-
Configuration Server (ACS). This protocol may be used to manage
other types of CPE as well, including stand-alone routers and LAN-
side client devices, as also shown in
F
i
g
u
r
e
1
8
7
.
Confidential and Proprietary Information of ZTE CORPORATION
179
19216811.live