Page 81 / 96
Scroll up to view Page 76 - 80
Settings
77
2.
Click
Add
.
3.
Enter the related parameters as described in the following table.
Parameters
Description
LAN IP Address
Enter the LAN IP address.
LAN Port
Set the LAN port.
WAN IP Address
Enter the WAN IP address.
WAN Port
Set the WAN port.
Protocol
Set which protocol will be used for filtering.
Status
Set how to handle the packet if it matches with the rule.
4.
Click
Save Changes
to add the new filtering rule.
Portmapping
To set portmapping rules, follow the steps below:
1.
Turn on the Portmapping.
Page 82 / 96
Settings
78
2.
Click
Add
.
3.
Enter the related parameters as described in the following table.
Page 83 / 96
Settings
79
Parameters
Description
Name
Enter a name for the rule.
WAN Port
Set the WAN port.
LAN IP Address
Enter the LAN IP address.
LAN Port
Set the LAN port.
Protocol
Set which protocol will be used for filtering.
4.
Click
Save Changes
to add the new portmapping rule.
Customization
1.
From the Web UI, click
Settings
>
Advanced Router
>
Customization
to enable or disable
UPnP and Out of Service Notification on this interface.
2.
Click
Save Changes
to save your settings.
About
Show your Pocket Wi-Fi's connection information, firmware information, WWAN information, Wi-Fi
details and device information.
1.
Launch the Web UI on your connected device. See
Web UI Overview
for details.
Page 84 / 96
Settings
80
2.
Click the
About
tab to view the available information.
Note:
You can also save this information to your computer by clicking
Save to file
.
Support
Obtain support information on this interface.
1.
Launch the Web UI on your connected device. See
Web UI Overview
for details.
Page 85 / 96
Settings
81
2.
Click the
Support
tab to view the available options.
19216811.live