1. Home
    2. /
  2. Manuals
    3. /
  3. ZTE
    4. /
  4. MF93D

ZTE MF93D Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of ZTE MF93D router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 2
MF93D
Let’s go
Getting started with your device.
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
LEGAL INFORMATION
Copyright © 2013 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or
utilized in any form or by any means, electronic or mechanical, includ-
ing photocopying and microfilm, without the prior written permission of
ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to
make modifications on print errors or update specifications without prior
notice.
Version No. : R1.0
Edition Time : 2013.04
NOTE:
Do not use the device in an enclosed environment or where heat dis
-
sipation is poor. Prolonged work in such space may cause excessive
heat and raise ambient temperature, which may lead to automatic shut
-
down of the device for your safety. In the case of such event, cool the
device in a well-ventilated place before turning on for normal use.
Getting to Know Your Device
Appearance
The following figure is only for your reference. The actual product may
be different.
External Antenna Connector
Micro USB Port
OLED Screen
Power Switch
(U)SIM Card Slot
RESET Button / microSD Card Slot
WPS Button
NOTES:
•
microSD logo
is a trademark of SD Card Association.
•
Please use the original external antenna if necessary.
Indicators
When the device is powered on, the following icons will appear on the
OLED screen, with the corresponding indicates listed in the table be
-
low:
Icon
Indication
Network signal strength.
2G/3G/4G
Network type. 2G, 3G, 4G icon will appear on the OLED
screen according to the network being connected.
Connect to the Internet automatically.
Connect to the Internet manually.
Roaming network indication.
New message received.
Wi-Fi Status and number of the connected users.
Battery power indication.
Connection Scenario
Your device supports two methods to go to Internet and supports multi-
clients for surfing on the Internet at the same time. The following figure
is only for your reference.
•
4G Mode
: Use your (U)SIM card to access the Internet.
•
Internet Wi-Fi Mode
: Your device will connect to other WLAN de
-
vice (hotspot device, wireless router, etc.) via Wi-Fi to access the
Internet. The WLAN device has already connected to the Internet.
NOTE:
The subnet must be deferent between your device and other WLAN
device.
Installing Your Device
1. Insert the SIM card.
IMPORTANT: Your device does not support Micro/Nano or any other
nonstandard SIM cards. To avoid device damage, please do not use
them.
2. Insert the microSD card.
1) Open the microSD card cover.
NOTE:
Do not pull the cover rudely, as it is connected with the device.
2)
Insert the microSD card into the microSD slot. The following picture
shows the correct inserting direction. You will hear a click when the
microSD card locks in place.
3) Close the microSD card cover.
Connecting to Your Device
Via Wi-Fi
1.
Power on your device directly. It will take 1~2 minutes to initialize.
2. Use your normal Wi-Fi application on the client to search for the
available wireless networks.
NOTE: Please set the client to obtain an IP address automatically refer-
ring to the chapter “Configuring Your PC”, and then the client will get an
IP address like “192.168.0.100”.
3.
Select the SSID of your device, and then click
Connect
. The follow
-
ing picture is only for your reference.
4.
Input the password, and then click Connect.
NOTE:
•
There may require the password for Wi-Fi connection, please check
the label on your device to get the default.
•
Double press the
WPS button
, and then the SSID and Wi-Fi key
will display on the OLED screen.
5.
Wait a moment, and then the client will connect to your device suc
-
cessfully.
Via USB Cable
1. Connect to the device.
2. Power on your device.
3.
The OS detects and recognizes new hardware and finishes the in
-
stallation automatically.
NOTE
: If the Windows operating system does not launch installation
automatically, you can run the installation program in path of
My Com-
puter > ZTEMODEM
.
4.
Wait a moment, and then the client will connect to your device suc
-
cessfully.
Accessing the Internet
4G Mode
After the client connected to your device successfully, you can access
the Internet in the
Automatic
or
Manual
mode. The default mode is
Automatic
.
Mode
Operations
Automatic
Your device will connect to the Internet automatically,
and your clients can surf on the Internet directly.
Manual
Login the webGUI configuration page, and select
Set-
tings > Network Settings > Dial-up Settings > Man-
ual
, and then click
Home > Connect / Disconnect
.
NOTE:
If you want to modify the detailed parameters of your device, please
login the webGUI configuration page by visiting http://192.168.0.1 or
http://m.home. The default password is
admin
.
Internet Wi-Fi Mode
1.
Login the webGUI configuration page.
2. Select
Settings > Internet Wi-Fi
.
3. Set the
Internet Wi-Fi Switch
and
Preferred Network
, and then
click
Apply
.
NOTE:
You need to Enable the Internet Wi-Fi Switch and select
Wi-Fi
.
1
2
3
4
5
6
7
8
9
Page 2 / 2
4.
Connect to the WLAN device.
There are two methods for your reference.
u
Select the listed
SSID
, and then click
Connect
.
u
Click
Add
, input the WLAN device information in the
Add Wi-Fi
Hotspot
area, and then click
Apply
.
5. After your device connected to the WLAN device successfully, you
can access the Internet.
Configuring Your PC
Follow the following steps and figures
for Windows XP to configure the Internet
Protocol for your Wi-Fi connection.
1. Right-click
My Network Places
, and
then select
Properties
.
2. Right-click
Wireless Network Connection
, and then select
Prop-
erties
.
3. Select
Internet Protocol(TCP/IP)
, and then click
Properties
.
4. Select
Obtain an IP address automatically
and
Obtain DNS
server address automatically
, and then click
OK
to finish the con
-
figuration.
Warning and Notice
To the Owner
•
Some electronic devices are susceptible to electromagnetic inter
-
ference sent by your device if inadequately shielded, such as the
electronic system of vehicles. Please consult the manufacturer of
your device before using if necessary.
•
Operating your device may interfere with medical devices like hear
-
ing aids and pacemakers. Please always keep them more than 20
centimeters away from such medical devices when they are turned
on. Turn your device off if necessary. Consult a physician or the
manufacturer of the medical device before using your device.
•
The device complies with RF specifications when the device is used
at 1cm from your body.
•
Be aware of the usage limitation when using your device at places
such as oil warehouses or chemical factories, where there are ex
-
plosive gases or explosive products being processed. Turn off your
device if required.
•
The use of electronic transmitting devices is forbidden in aircrafts,
at petrol stations and in hospitals. Please observe and obey all
warning signs and switch off your device in these conditions.
•
Do not touch the inner antenna area if not necessary. Otherwise it
will affect your device’s performance.
•
Store your device out of the reach of little children. Your device may
cause injury if used as a toy.
•
Do not touch the metallic parts of your device so as to avoid a burn,
when your device is working.
Using Your Device
•
The device is for indoor use only. Do not use the device outside.
The device does not support DFS.
•
Please use original accessories or accessories that are authorized.
Using any unauthorized accessories may affect your device’s per
-
formance, and violate related national regulations about telecom
terminals.
•
Avoid using your device near or inside metallic structures or estab
-
lishments that can emit electromagnetic waves. Otherwise it may
influence signal reception.
•
Your device is not waterproof. Please keep it dry and store in a
shady and cool place.
•
Do not use your device immediately after a sudden temperature
change. In such case, it will produce dew inside and outside your
device, so don’t use it until it becomes dry.
•
Handle your device carefully. Do not drop, bend or strike it. Other
-
wise your device will be damaged.
•
No dismantling by non-professionals and only qualified technicians
can undertake repair work.
•
Operating temperature range of 0°C ~ +35°C and humidity range of
5% ~ 95% are recommended.
About your Adapter
•
Adapter shall be installed near the equipment and shall be easily
accessible.
•
Model:
ZTE MF93D
•
Manufacturer:
ZTE Corporation
•
The plug considered as disconnect device of adapter.
Using Battery
•
Do not short-circuit the battery, as this can cause excessive heat
and fire.
•
Do not store the device in hot areas or dispose of it in a fire to avoid
explosion.
•
Do not disassemble or modify the battery.
•
Never use any charger or battery damaged or worn out.
•
Return the wear-out battery to the provider or put it in the appointed
recycle place. Do not put it in familial rubbish.
WARNING:
Do not change the built-in rechargeable battery in your device by your-
self. The battery can only be changed by ZTE or ZTE authorized ser-
vice provider.
Limited Warranty
•
This warranty does not apply to defects or errors in the Product
caused by:
i.
Reasonable abrasion.
ii.
End User’s failure to follow ZTE’s installation, operation or main
-
tenance instructions or procedures.
iii.
End User’s mishandling, misuse, negligence, or improper installa
-
tion, disassembly, storage, servicing or operation of the Product.
iv. Modifications or repairs not made by ZTE or a ZTE-certified in
-
dividual.
v.
Power failures, surges, fire, flood, accidents, actions of third
parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-
party products provided that such defects are due to the com-
bined usage.
vii. Any other cause beyond the range of normal usage intended for
the Product.
End User shall have no right to reject or return the Product, or receive a
refund for the Product from ZTE under the above-mentioned situations.
•
This warranty is End User’s sole remedy and ZTE’s sole liability
for defective or nonconforming items, and is in lieu of all other war
-
ranties, expressed, implied or statutory, including but not limited to
the implied warranties of merchantability and fitness for a particular
purpose, unless otherwise required under the mandatory provisions
of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, inci
-
dental or consequential damages resulting from or arising out of or in
connection with using of this product, whether or not ZTE had been ad
-
vised, knew or should have known of the possibility of such damages,
including, but not limited to lost profits, interruption of business, cost of
capital, cost of substitute facilities or product, or any downtime cost.
Troubleshooting
Problem
Suggested Solution
Can not establish
the USB connection
between your device
and PC
•
You need to install the software. Run the in
-
stallation program in path of
My Computer >
ZTEMODEM
.
•
If the driver of your device is abnormal,
please reinstall the software. You need unin
-
stall the software first.
Problem
Suggested Solution
Can not establish
the Wi-Fi connection
between your device
and client
•
Make sure the Wi-Fi function is active. Press
the
WPS
button to enable
or disable
Wi-Fi function.
•
Refresh network list and select the correct SSID.
•
Check the IP address to make sure your cli
-
ent can obtain an IP address automatically in
the Internet protocol (TCP/IP) properties.
•
Type the correct network key (Wi-Fi pass
-
word) when you connect to the device.
The client connected
to the device can not
access the Internet
•
Make sure your (U)SIM card is available.
•
Change the location to find a place with good
signal.
•
Check WAN Connection mode setting.
•
Contact with your service provider and con
-
firm your APN settings.
When I use Internet
Wi-Fi mode, the
client cannot access
the Internet.
•
Make sure the other WLAN device has al
-
ready connected to the Internet.
•
Make sure that the subnet of your device and
the other WLAN device is different
Can not visit the
webGUI configura
-
tion page
•
Enter the correct address. The default ad
-
•
Only use one network adapter in your PC.
•
Do not use any proxy server.
Problem
Suggested Solution
About the password
• Press the
WPS
button twice, and then the
SSID and Wi-Fi connection password appear
on the screen.
•
The default password of the webGUI configu
-
ration page is
admin
.
•
If you changed the password and forgot the
new password, you need to restore the de
-
vice to the factory default settings.
About the device
• Press the
reset button
, the device will reset
to the default settings.
•
If there is any exception while using the de
-
vice, please press and hold the
Power But-
ton
for about 10 s, and the device will restart.
For more assistance, please:
•
Send E-mail to
•
Visit
•
Call Service Hotline:
+86–755–26779999
10
11
12
13
14
15
16
17
18

Rate

4.5 / 5 based on 2 votes.

Popular ZTE Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top