1. Home
    2. /
  2. Manuals
    3. /
  3. ZTE
    4. /
  4. F668
    5. /
  5. 3
Page 11 / 12 Scroll up to view Page 6 - 10
2.3 WLAN Configuration
2.3.1 Configuring Basic WLAN Parameters
Perform this procedure to configure the basic WLAN parameters.
1. From top menu bar, click on the Network
tab and choose WLAN,
then
Basic
.
2. Check the parameters in Table 2-1 match the contents of the main window of
Figure 2-2. Amend if required and click Submit
to apply the changes.
Figure 2-2
Table 2-1 Parameter Description
**Note** All other parameters in this section should remain as default
Page 11
Parameter
Description
Wireless RF Mode
Set to Enabled – Options are Enabled, Disabled and Scheduled.
Mode
Set to Mixed (802.11b+802.11g+802.11n)
Country/Region
Set to United Kingdom or Other
Bandwidth
Set to 20Mhz (Default setting)
Channel
Set to Auto as default. (switches channels if interference is detected)
Transmit Power
Default 100%
Page 12 / 12
2.3.2 Security
Perform this procedure to configure WLAN security.
WPA2-PSK
To configure the WPA/WPA2-PSK authentication mode, perform the following steps:
1. On the menu bar at the top of the window click on the Network
tab and then from
the menu on the left choose WLAN
and then Security
.
2. In the middle window, select WPA/WPA2-PSK
from the Authentication Type
drop-
down list. Next Type a memorable password into WPA Passphrase
box and select
TKIP+AES
from the WPA Encryption Algorithm
drop-down list.
Select Submit
and the security configuration is complete.
Page 12

Rate

4.7 / 5 based on 3 votes.

Popular ZTE Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top