Zoom 5360 Router Manual PDF (Setup & Configuration Guide)

Page 91 / 126 Scroll up to view Page 86 - 90

Figure 30. Example of Radio Page

Table 24. Radio Menu Option

Option

Description

Select 2.4 or 5 GHz

Select which band you want to make changes on.

Wireless

Select Enable to enable the wireless function.

Country

Your device is configured for operation in the U.S. only.

Output Power

Set the strength of the wireless signal that the Cable

Modem/Router transmits.

802.11 Band

Displays the current selected band.

802.11n-mode

In

Auto

mode, your Cable Modem/Router will automatically

adjust to avoid interference with neighboring devices.

Bandwidth

Specify radio frequency bandwidth, either 20MHz single, or

40MHz (dual channel), that the Cable Modem/Router will use if

802.11n mode is configured as Automatic and the Control

Channel is configured as Automatic.

Sideband for

Control Channel

(40 MHz only)

You may select Sideband and the secondary extension

channels if your Cable Modem/Router is operating at 40 MHz

bandwidth and the 802.11n-mode is configured as

Auto

.

Control Channel

Select the channel for AP operation next to the drop-down list

box. The current channel number is displayed. The list of

detailed control channel and extension channels are shown in

the Table below.

91

Page 92 / 126

Regulatory Mode

By default is Off. Most users will not need to change this setting.

TPC Mitigation (db)

By default is Off. Most users will not need to change this setting.

OBSS Coexistence

By default is set to 1 (Enabled). This allows the wireless

bandwidth to fall back from 40Mhz to 20Mhz when the

modem/router detects interference in the area. You may select

0 (Disabled) to disable this feature. Disabling OBSS

Coexistence can result in poor wireless performance if there is

interference in your area. Most users will not need to change

these settings.

STBC Tx

By default is set to Auto. Most users will not need to change this

setting.

Restore Wireless

Defaults

Click on the Restore Wireless Defaults button to restore the

Wireless settings.

Table 25. Country Extension Channel List

Control Channel

Sideband for

Control

Channel

Extension

Channel

US Channel 1-7

Lower

Channel

Number + 4

US Channel 5-11

Upper

Channel

Number - 4

Example 1

: If your control channel is set to 1, the extension channel will be transmitted

on channel 5. The total bandwidth of the signals on channel 1 and 5 equals 40 MHz.

Example 2

: If your control channel is set to 11, the extension channel will be transmitted

on channel 7. The total bandwidth of the signals on channel 11 and 7 equals 40 MHz.

Primary Network

The Primary Network page allows you to configure the primary wireless network and its

security settings. Strong security is the best way to prevent unauthorized wireless

network access. To access the

Primary Network

page:

1

Click

Wireless

in the menu bar.

2

Then click the

Primary Network

submenu.

Figure 31 shows an example of the menu and Table 24 describes the items you can

select.

92

Page 93 / 126

Figure 31. Example of Primary Network Page

Table 26. Primary Network Menu Option

Option

Description

Primary Network

Select Enable to enable primary wireless network.

Network Name (SSID)

Set the Network Name (also known as SSID) of the

wireless network. This is a 1-32 ASCII character string.

Closed Network

Select Enable to suppress broadcast of the SSID.

Mode Required

Default set to None. Choice to select None, HT and VHT.

Most users will leave this None.

Client Isolate

Prevents wireless clients on your network from

communicating with other wireless clients.

WPA

Wi-Fi Protected Access (WPA) offers stronger encryption

than WEP. Enable WPA alone if you have a RADIUS

server (unlikely for most home users) – otherwise

WPA-PSK.

WPA-PSK

Offers stronger encryption than WEP. When enabled, you

must also enter a Pre-Shared Key that will by used by all

93

Page 94 / 126

wireless clients to access the wireless network.

WPA2

Offers state-of-the-art security. Enable WPA2 alone only if

you have a RADIUS server(unlikely for most home users;

otherwise use WPA2-PSK.

WPA2-PSK

Offers state-of-the-art security. When enabled, you must

also enter a Pre-Shared Key below that will by used by all

wireless clients to access the wireless network.

WPA/WPA2 Encryption

Select Enable to use WPA/WPA2 encryption. Most users

should use the default setting of TKIP+AES.

WPA Pre-Shared Key

Enter a 8-63 ASCII character string if you have enabled

WPA-PSK or WPA2-PSK.

RADIUS Server

If you’re using a RADIUS server, enter it’s IP address

here. The RADIUS server may be on either public network

(WAN) or private network (LAN).

RADIUS Port

(Relevant only when the

RADIUS server is enabled)

Enter the UDP port number of the RADIUS server. The

default port is 1812.

RADIUS Key

(Relevant only when the

RADIUS server is enabled)

Enter the RADIUS Key.

Group Key Rotation

Interval

(Relevant only when the

RADIUS server is enabled)

When enabled, the Cable Modem/Router generates the

best possible random group key and updates all

key-management capable clients periodically. Set to zero

to disable periodic rekeying.

WPA/WPA2 Re-auth

Interval

Interval (in seconds) at which the Cable Modem/Router (if

using WPA-PSK key management) or RADIUS server (if

using WPA key management) sends a new group key out

to all clients. The re-keying process is the WPA equivalent

of automatically changing the WEP key for an AP and all

stations in a WLAN on a periodic basis.

WEP Encryption

WEP Encryption should be left disabled by most users. To

set WEP Encryption, first you must click on the Radio

submenu button and set 802.11n Mode to Disabled.

Then on the Primary Network page you must disable

WPA-PSK and WPA2-PSK.

WEP Encryption can be set to WEP 128-bit, 64-bit, or

Disable. Both the wireless clients and the Cable

Modem/Router must use the same WEP key.

Network Key 1-4

You can pre-define up to 4 keys for 64-bit or 128-bit WEP.

64-bit keys require 10 hexadecimal digits and 128-bit key

require 26 hexadecimal digits.

Current Network Key

Select one of the four pre-defined keys as the current

94

Page 95 / 126

network key.

PassPhase

Enter a word or group of printable characters and click

Generate WEP keys to generate WEP encryption key.

These characters are case sensitive.

Generate WEP Keys

Click to generate 4 WEP keys automatically.

Automatic Security

Configuration

Disable or enable WPS. WPS does not work with WEP.

Device Name

Enter a name to identify this Cable Modem/Router in WPS

network.

WPS AP Setup

PIN (Personal Identification Number) is the WDS ID

number of your PC or game machine. When a

WPS-supported device tries to connect to this Cable

Modem/Router, you have to enter its PIN into the WPS

Setup AP’s PIN field, then click

Configure

.

WPS Add Client

Select WPS mode to be deployed.

Client PIN

For devices that require a PIN, enter the PIN in the WPS

Add Client PIN’s field, and then click

Add

.

Guest Network

The Guest Network page allows you to configure a guest network. A guest network is a

small section of an organization's computer network designed for use by temporary

visitors. This guest network often provides full Internet connectivity, but it also strictly

limits access to any internal (intranet) Web sites or files.

Traditionally, you needed to use different APs to configure different Basic Service Sets

(BSSs). Your Cable Modem/Router supports Multiple SSIDs which allows you to use the

same access point to provide several BSSs simultaneously. You can then assign

various privileges to different SSIDs and associated networks.

y

Up to eight BSSs are allowed on one Cable Modem/Router simultaneously, one for

Admin access and seven for Guest Networks.

y

If you are using WEP, you must use different WEP keys for different BSSs.

y

You should use different PSKs for different BSSs if you are using WPA/WPA2.

To access the

Guest Network

page:

1

Click

Wireless

in the menu bar.

2

Then click the

Guest Network

submenu.

Figure 36 shows an example of the menu and Table 25 describes the items you can

select.

95

Rate

Popular Zoom Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share