Page 41 / 428
Scroll up to view Page 36 - 40
Before You Install the ZoneAlarm Router
Chapter 3: Installing and Setting Up ZoneAlarm
27
Installing TCP/IP Protocol
1.
In the
Local Area Connection Properties
window click
Install
.
The
Select Network Component Type
window appears.
2.
Select
Protocol
and click
Add
.
The
Select Network Protocol
window appears.
3.
Choose
Internet Protocol (TCP/IP)
and click
OK
.
TCP/IP protocol is installed on your computer.
Page 42 / 428
Before You Install the ZoneAlarm Router
28
Check Point ZoneAlarm User Guide
TCP/IP Settings
1.
In the
Local Area Connection Properties
window, double-click the
Internet
Protocol (TCP/IP)
component, or select it and click
Properties
.
The
Internet Protocol (TCP/IP) Properties
window opens.
2.
Click the
Obtain an IP address automatically
radio button.
Note:
Normally, it is not recommended to assign a static IP address to your PC but
rather to obtain an IP address automatically. If for some reason you need to assign
a static IP address, select
Specify an IP address
, type in an IP address in the range of
192.168.10.129-254, enter 255.255.255.0 in the Subnet Mask field, and click OK to
save the new settings.
(Note that 192.168.10 is the default value, and it may vary if you changed it in the
Network > My Network page
.)
3.
Click the
Obtain DNS server address automatically
radio button.
4.
Click
OK
to save the new settings.
Your computer is now ready to access your ZoneAlarm router.
Page 43 / 428
Before You Install the ZoneAlarm Router
Chapter 3: Installing and Setting Up ZoneAlarm
29
Mac OS
Use the following procedure for setting up the TCP/IP Protocol.
1.
Choose
Apple Menus -> Control Panels -> TCP/IP
.
The
TCP/IP window
appears.
2.
Click the
Connect
via
drop-down list, and select
Ethernet
.
3.
Click the
Configure
drop-down list, and select
Using DHCP Server
.
4.
Close the window and save the setup.
Page 44 / 428
Before You Install the ZoneAlarm Router
30
Check Point ZoneAlarm User Guide
Mac OS-X
Use the following procedure for setting up the TCP/IP Protocol.
1.
Choose
Apple -> System Preferences
.
The
System Preferences
window appears.
2.
Click
Network
.
The
Network
window appears.
Page 45 / 428
Before You Install the ZoneAlarm Router
Chapter 3: Installing and Setting Up ZoneAlarm
31
3.
Click
Configure
.
19216811.live