Page 76 / 428
Scroll up to view Page 71 - 75
Using the Internet Wizard
62
Check Point ZoneAlarm User Guide
Using a Static IP Connection
If you selected the Static IP connection method, the
Static IP Configuration
dialog box
appears.
1.
Complete the fields using the information in the following table.
2.
Click
Next
.
The
Confirmation
screen appears.
3.
Click
Next
.
The system attempts to connect to the Internet via the specified connection.
The
Connecting…
screen appears.
At the end of the connection process the
Connected
screen appears.
4.
Click
Finish
.
Page 77 / 428
Using the Internet Wizard
Chapter 5: Configuring the Internet Connection
63
Table 13: PPPoE Connection Fields
In this field…
Do this…
IP Address
Type the static IP address of your ZoneAlarm router.
Subnet Mask
Select the subnet mask that applies to the static IP address of your
ZoneAlarm router.
Default Gateway
Type the IP address of your ISP’s default gateway.
Primary DNS Server
Type the Primary DNS server IP address.
Secondary DNS Server
Type the Secondary DNS server IP address.
This field is optional.
WINS Server
Type the WINS server IP address.
This field is optional.
Using a DHCP Connection
No further settings are required for a DHCP (Dynamic IP) connection. The
Confirmation
screen appears.
1.
Click
Next
.
The system attempts to connect to the Internet via the specified connection.
The
Connecting…
screen appears.
At the end of the connection process the
Connected
screen appears.
2.
Click
Finish
.
Page 78 / 428
Using Internet Setup
64
Check Point ZoneAlarm User Guide
Using Internet Setup
Internet Setup allows you to manually configure your Internet connection.
To configure the Internet connection using Internet Setup
1.
Click
Network
in the main menu, and click the
Internet
tab.
The
Internet
page appears.
2.
Next to the desired Internet connection, click
Edit
.
Page 79 / 428
Using Internet Setup
Chapter 5: Configuring the Internet Connection
65
The
Internet Setup
page appears.
3.
Do one of the following:
•
To configure an Ethernet-based connection, continue at
Configuring an
Ethernet-Based Connection
on page 66.
•
To configure no connection, continue at
Using No Connection
on page 74.
Page 80 / 428
Using Internet Setup
66
Check Point ZoneAlarm User Guide
Configuring an Ethernet-Based Connection
1.
In the
Port
drop-down list, do one of the following:
•
To configure an Ethernet-based connection through the WAN port, select
WAN
.
•
To configure an Ethernet-based connection through the DMZ/WAN2 port,
select
WAN2
.
2.
In the
Connection Type
drop-down list, select the Internet connection type you
intend to use.
The display changes according to the connection type you selected.
If you chose LAN, continue at
Using a LAN Connection
on page 66.
If you chose Cable Modem, continue at
Using a Cable Modem Connection
on page
68.
If you chose PPPoE, continue at
Using a PPPoE Connection
on page 69.
If you chose PPTP, continue at
Using a PPTP Connection
on page 71.
If you chose Telstra, continue at
Using a Telstra (BPA) Connection
on page 73.
Using a LAN Connection
1.
Complete the fields using the relevant information in
Internet Setup Fields
on
page 75.
19216811.live