Page 31 / 145
Scroll up to view Page 26 - 30
15xx-A1 Family Router Users Guide
31
Chapter 4 Quick Setup
The Automatic Configuration feature will automatically detect the first usable PVC and
automatically detect PPPoE, PPPoA, and Bridge Protocol (with DHCP Server available). To use
the Automatic Configuration feature you check the
Automatic Configuration
option.
Note
: In order for the automatic configuration to work, all previously defined WAN configurations must
be removed.
Quick Setup with Automatic Configuration
To enable the Automatic Configuration feature:
1.
From the navigation pane on the left select
Quick Setup
.
2.
Select
Automatic Configuration
.
Page 32 / 145
65xx-A1 Family Router Users Guide
32
3.
Enter the SSID.(6518/6519 only)
4.
Click
Apply/Save
.
You will see a progress screen
When the connection is complete you will see the Service Setup summary screen.
Quick Setup with Automatic Configuration Disabled
1.
From the navigation pane on the left select
Quick Setup
.
Page 33 / 145
65xx-A1 Family Router Users Guide
33
2.
Specify the
VPI
and
VCI
as directed by your ISP.
3.
Select the
Encapsulation Mode
as directed by your ISP.
4.
Under
WAN Service Configuration
select the protocol for the WAN connection from the
Protocol
dropdown as directed by your ISP.
Depending on the protocol selected further parameters are presented. For example, if you
selected PPPoE or PPPoA, the
PPP Username
and
Password
option appears.
PPPoE
and
PPPoA
:
You will need to enter the PPP username and password as provided
by your ISP.
Page 34 / 145
65xx-A1 Family Router Users Guide
34
For PPPoE, if desired, the DSL Router can be configured with a static IP address and
Subnet Mask for the LAN interface to correspond to your LAN’s IP Subnet. To use a
static IP address check the Use Static IP Address option, then enter the
IP Address
,
Subnet Mask
, Default
Gateway
and
DNS
server.
Page 35 / 145
65xx-A1 Family Router Users Guide
35
19216811.live