15xx-A1 Family Router Users Guide

56



WAN Interfaces

: defines the WAN interface for this filter.

This drop down list will show all

the available WAN interfaces.

Click

Save/Apply

to save the MAC filter.

When you

Save / Apply

the IP filter, the

MAC Filtering Setup

screen appears. The

MAC

Filtering Setup

screen lists the MAC filters, including filters which were added from the previous

screen.

You can view, add or delete MAC filters. The

Remove

button appears only when you have an

existing IP filter already set up.

15xx-A1 Family Router Users Guide

57

Parental Control

Use the Parental Control feature to restrict the days and times a particular device is allowed to

access the Internet.

Time Restriction

To setup parental controls:

1.

Click

Add

to set up the restrictions.

The

Add Parental Control

screen appears.

15xx-A1 Family Router Users Guide

58

2.

Enter a

User Name

to identify the target of the restrictions. .

This is equivalent to the host

name of the IP clients (refer to the

DHCP status

screen check to see the host names)

3.

Enter the MAC address of the network adapter to be restricted, and, optionally, another MAC

address.

4.

Select the days of the week the restriction is in force.

5.

Specify the start and end times the restriction is in force. Use the form hh:mm, where 23:59,

for example, is one minute before midnight.

6.

Click

Save / Apply

to save the settings and to continue.

URL Filter

Access to websites can be blocked by creating a URL filter. Two types of lists can be created,

either an exclude or include list.

1.

Select the

Exclude

button or

Include

button to specify the web sites you want to block or

allow access.

2.

Click

Add

to continue to the next screen to enter the URL address.

15xx-A1 Family Router Users Guide

59

3.

In

URL Address

enter the URL address; in

Port Number

enter the port number and click

Save / Apply

.

If no port number is entered, the default 80 port will be applied. Continue this process until all

the necessary websites are entered.

15xx-A1 Family Router Users Guide

60

Quality of Service

You can configure the Quality of Service to apply different priorities to traffic on the router.

Queue Config

In the

QoS -- Queue Management Configuration

page you can enable a queue for a network

interface. Each interface associated with QoS is allocated three queues. Lower Queue

Precedence values denote a higher priority for the queue, so ―1‖ has higher priority than ―2.‖

To enable QoS:

1.

From the

Quality of Services

page, check

Enable QoS

.

2.

From the

Select Default DSCP Mark

drop down select the option as directed by your ISP.

Differentiated Services Code Point (DSCP) is a means to classify packets in the IP header of

the packet.

To associate an interface with QoS: