Page 6 / 26
Scroll up to view Page 1 - 5
´
D-Link VTA User Manual
Chapter ² - Product Overview
Rear Panel
Front Panel
Power
Internet
Phone 1
Phone 2
When the power light
stops blinking and is a
solid green, this indicates
that your adapter has
started up properly. Note
that both the power light
and the phone light must
be solid in order to make
a phone call.
Solid light indicates
connectivity to your
router or network
- whenever there is
data activity this light
will blink.
Solid light indicates
that phone line 1 is
ready for Vonage
Internet telephone or
FAX calls. A blinking
light indicates that
the phone is in use.
If the LED is blinking
slowly, there is
voicemail on the line.
Solid light indicates
that optional phone
line 2 is ready for
Vonage Internet
telephone or FAX
calls. A blinking
light indicates that
the phone/FAX is
in use. If the LED
is blinking slowly,
there is voicemail
on the line.
Phone (1 & 2)
Internet
Reset
Power
Plug your phone into
port #1 and if you’ve
signed up for a second
Vonage phone line, an
optional phone or FAX
machine into phone
port #2.
Connect to your
network using the blue
Ethernet cable.
Press the reset button
for at least 10 seconds
to reset the VTA back to
the default settings.
Plug in the
supplied power
adapter.
Page 7 / 26
µ
D-Link VTA User Manual
Installation
2
Chapter ² - Product Overview
Page 8 / 26
¶
D-Link VTA User Manual
Chapter ³ - ±nstallation
Network Overview
Below is a common way to connect your VTA to your network.
Page 9 / 26
·
D-Link VTA User Manual
Chapter ³ - ±nstallation
Install the Hardware
Verify the status lights on the unit.
The Power, Phone 1, and Internet
status lights should be solid green.
The Phone 2 light will be a solid
green if you have a second Vonage
line. (The Internet light will blink
whenever there is data activity.)
1
2
3
Connect the blue Ethernet cable into
the blue port labeled
Internet
on
the back of the telephone adapter.
Connect the other end to one of your
router’s Ethernet ports.
Connect the included power supply
to the
Power
port of the Telephone
Adapter. The Power LED will go through
a blink sequence before turning solid
green.
Warning:
Using a power supply with a
different voltage will cause damage to
the device and will void the warranty.
Page 10 / 26
¸
D-Link VTA User Manual
Chapter ³ - ±nstallation
Congratulations! You’ve finally freed yourself from the
phone company.
Once you hear the dial tone, please call 800-342-1791 to complete the installation process.
Then, you’re all set. Even if you are transferring your telephone number to Vonage, you
can enjoy the great savings and super quality by using your Vonage phone service right
NOW.
Bon Vonage!
911 Service:
Vonage’s 911 offering is different from that offered by traditional telephone
companies; please visit www.vonage.com/911 to learn more about it.
Insert the provided RJ-11 telephone
cable into the green port labeled
Phone 1
on the back of the Vonage
adapter. Connect the other end to
your telephone.
If you activate a second Vonage phone
line, then connect another phone or
FAX machine into the
Phone 2
port.
Check for dial tone. If you do not hear one, please consult the Troubleshooting
section of this guide.
4
19216811.live